| Slant Six Forum https://slantsix.org/forum/ |
|
| F Body Front suspension Breaks https://slantsix.org/forum/viewtopic.php?t=32911 |
Page 2 of 2 |
| Author: | 70valiant [ Wed Feb 10, 2010 9:44 am ] |
| Post subject: | |
Do you have a link for the new name? |
|
| Author: | Greg Ondayko [ Wed Feb 10, 2010 10:26 am ] |
| Post subject: | |
Phil, Try these: http://www.aspenandvolare.com/ http://www.fbodymopars.com/ http://www.dippy.org Greg |
|
| Author: | 70valiant [ Wed Feb 10, 2010 4:07 pm ] |
| Post subject: | |
Thanks Greg, I wonder why the link I have in my favorites no longer works. |
|
| Author: | Romeo Furio [ Thu Feb 11, 2010 6:57 am ] |
| Post subject: | F body |
Greg I can get you a 76 Aspen for free with a nice rust free body 2 door. The guy asked me just last week to take it away. I just shipped a pickup to Charleroi a few days ago for a grand(runs). I don't know that it will run,, you can ship open for around 800 bucks if it does run. I hate when I find this stuff because being a easterner when I don't see rust I go nuts. But no room and far away to ship the cost factor gets involved. The 65 Dart has me in that dilemma now. |
|
| Author: | Volare4life [ Fri Feb 12, 2010 8:52 pm ] |
| Post subject: | |
I agree with volaredon on the reinforecment, take a look at http://www.firmfeel.com and check out there " reinforced" LCA's, something you could do on the cheap with some 12-14 guage sheet steel. Volare don you wouldn't happen be talking about me would you ? "someone was looking for parts and I saw someone selling those very parts on another site which the F body site owner "doesn't like" (not this one) the references here haven't been touched. (it's the "old Hippie" site he don't like)" -Mike |
|
| Author: | volaredon [ Sat Feb 13, 2010 7:03 am ] |
| Post subject: | |
Quote: I agree with volaredon on the reinforecment, take a look at http://www.firmfeel.com and check out there " reinforced" LCA's, something you could do on the cheap with some 12-14 guage sheet steel.
It coulda been you; I don't know anymore. but if it was, there you go. there's the parts you need. Volare don you wouldn't happen be talking about me would you ? "someone was looking for parts and I saw someone selling those very parts on another site which the F body site owner "doesn't like" (not this one) the references here haven't been touched. (it's the "old Hippie" site he don't like)" -Mike and the reinforcement I was talking about (and where this part that broke on the OP's car) has nothing to do with the LCA; but with the age these cars now have on them, it sure would not hurt to reinforce anything that can be. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|