| Slant Six Forum https://slantsix.org/forum/ |
|
| 8 3/4 https://slantsix.org/forum/viewtopic.php?t=36294 |
Page 2 of 2 |
| Author: | Rug_Trucker [ Tue Dec 01, 2009 4:00 am ] |
| Post subject: | |
I think you can get away without swapping the spring mounts. |
|
| Author: | Rogue [ Wed Dec 02, 2009 6:48 am ] |
| Post subject: | |
If I plan on sticking to the 8.25 that is currently installed, how much HP/Torque should it be able to withstand? This will help me decide my options for the motor. Thanks all *Rogue |
|
| Author: | Joshie225 [ Wed Dec 02, 2009 6:58 am ] |
| Post subject: | |
8 1/4s are pretty good. Unless you go drag racing with a manual trans and slicks I think you're unlikely to find the limits with a slant. |
|
| Author: | GunPilot [ Sun Dec 13, 2009 7:04 am ] |
| Post subject: | |
Quote: One other thing I like about the 8 3/4, that is their taper-roller type axle bearings with end play adjustment... not a ball bearing. (I will never unstand why people would want to use those "Green" bearings on an 8 3/4) 
 I remember!I installed an 8 3/4 on my 74 Duster - here's the thread Don't recommend cannabalizing an E body these days though... |
|
| Page 2 of 2 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|