Frank sent me a link to some pictures.
The best pic of a /6 that I see is one with a B&M blower
http://www.aussiespeed.com/details/wp-c ... nifold.JPG
Alot of pics on the website too
http://www.aussiespeed.com/details/?page_id=102
| Slant Six Forum https://slantsix.org/forum/ |
|
| Hurricane Sl6 Blower Intake Group Buy https://slantsix.org/forum/viewtopic.php?t=36305 |
Page 2 of 5 |
| Author: | CARS [ Sun Jul 19, 2009 7:50 am ] |
| Post subject: | |
Frank sent me a link to some pictures. The best pic of a /6 that I see is one with a B&M blower http://www.aussiespeed.com/details/wp-c ... nifold.JPG Alot of pics on the website too http://www.aussiespeed.com/details/?page_id=102 |
|
| Author: | Rayman440 [ Sun Jul 19, 2009 5:56 pm ] |
| Post subject: | |
Hi folks, to clear up some of the finer details, there are injector bungs in the manifold, the image posted is an early-gen casting. There is no way a draw-thru carb setup will clear the hood with this intake, however EFI would. Ray |
|
| Author: | 66aCUDA [ Thu Aug 06, 2009 8:47 am ] |
| Post subject: | |
Ok folks Im bringing this to the top. AS I Understand it the Blower Manifolds are ready. I would assume you can also get 2bbl, 4bbl, 3 duece, etc at the same time to save on the shipping costs. Also any of there other fine products like gaskets. I am trying to have this order kick in the 1 st of Sept so if you want in sound off with what you want. Thanks Raymond, Frank |
|
| Author: | terrylittlejohn [ Thu Aug 06, 2009 11:51 am ] |
| Post subject: | |
i don`t know if a 4-71 on this manifold will let me see the xmas tree??? |
|
| Author: | CARS [ Thu Aug 06, 2009 1:14 pm ] |
| Post subject: | |
Quote: i don`t know if a 4-71 on this manifold will let me see the xmas tree???
Just win lane choice and stay in the left lane 
|
|
| Author: | terrylittlejohn [ Thu Aug 06, 2009 5:27 pm ] |
| Post subject: | |
i could make that work 
|
|
| Author: | 66aCUDA [ Thu Aug 06, 2009 7:13 pm ] |
| Post subject: | |
Quote: i don`t know if a 4-71 on this manifold will let me see the xmas tree???
Use a CLEAR Bugcatcher Frank |
|
| Author: | Volare4life [ Tue Aug 11, 2009 3:37 pm ] |
| Post subject: | |
I dunno, I still think that longer of a drive snout would put a sh!it ton of stress on the drive rotor bearings. I would like to see a nice brace that bolts to the front of the engine to help support the snout, just sayin, -Mike |
|
| Author: | pemercie [ Tue Aug 11, 2009 6:01 pm ] |
| Post subject: | Aussie Manifold Group Buy |
Where do we send money to take advantage of the group buy? Please advise asap. I will be getting a 4bbl.Thanks,S Scamp |
|
| Author: | 66aCUDA [ Tue Aug 11, 2009 6:22 pm ] |
| Post subject: | |
Raymond will contact us. I guess we should start a list. Frank 66aCuda = 1 Blower Manifold Lou Dart 270 = 1 Blower Manifold Pemercie =4 bbl Manifold Just copy this or make corrections and repost. Thanks, Frank |
|
| Author: | SV162 [ Tue Aug 11, 2009 8:05 pm ] |
| Post subject: | |
Here's some pics of a very nice AP6 Valiant in Aus using the Aussiespeed intake, just to whet your appetites. The blower is a 144 B&M.    
|
|
| Author: | Joshie225 [ Tue Aug 11, 2009 11:36 pm ] |
| Post subject: | |
I have one of those B&M blowers. I wonder how hard it was to adapt. |
|
| Author: | SV162 [ Wed Aug 12, 2009 12:06 am ] |
| Post subject: | |
More info here Josh. http://www.moparmarketforum.com/forum/v ... 13&t=16971 |
|
| Author: | Joshie225 [ Wed Aug 12, 2009 12:13 am ] |
| Post subject: | |
Too bad I'd have to register on that forum to see any of the pictures. |
|
| Author: | 66aCUDA [ Wed Aug 12, 2009 4:55 am ] |
| Post subject: | |
For those of you wondering In the First Picture you can see the snout support if you look close. Frank |
|
| Page 2 of 5 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|