Well I gust Got Mine - In less than 48 Hours!
I will post some pics too!
Greg
| Slant Six Forum https://slantsix.org/forum/ |
|
| The Pro Tru's are coming! 3.504 Forged SL6 Pistons https://slantsix.org/forum/viewtopic.php?t=37128 |
Page 2 of 2 |
| Author: | Greg Ondayko [ Wed Sep 30, 2009 12:47 pm ] |
| Post subject: | Got Mine |
Well I gust Got Mine - In less than 48 Hours! I will post some pics too! Greg |
|
| Author: | Rick Covalt [ Wed Sep 30, 2009 1:37 pm ] |
| Post subject: | Cool! |
Those look great !! Rick |
|
| Author: | madmax/6 [ Wed Sep 30, 2009 7:45 pm ] |
| Post subject: | |
I agree.I came up with just over 6cc.Mark |
|
| Author: | Shaker223 [ Sun Oct 04, 2009 4:52 pm ] |
| Post subject: | |
Greg, wait until you have to put the locks in for the wrist pin......lotsa fun! |
|
| Author: | ceej [ Sun Oct 04, 2009 4:57 pm ] |
| Post subject: | |
Look great! Now, how much do they weigh? I'm coming into this late... What is the pin height?  CJ |
|
| Author: | Rick Covalt [ Tue Nov 30, 2010 6:04 am ] |
| Post subject: | Oversize? |
For the folks that buy the +.104 pistons. Are there other sizes available in case you need to go .010 or .020 over on a re-bore? Just wondering. Rick |
|
| Author: | 1974duster kev [ Tue Nov 30, 2010 6:31 am ] |
| Post subject: | |
I think the smallest is .030 i have a set of .045's Kev |
|
| Author: | Rick Covalt [ Tue Nov 30, 2010 8:34 am ] |
| Post subject: | ? |
I mean .010 or .020 over the .104 size. If you build a big bore motor it will eventually need rebuilt and bored bigger. Just wondering. |
|
| Author: | Rob Simmons [ Tue Nov 30, 2010 8:56 am ] |
| Post subject: | |
Hey Rick, The .104 was the biggest he made IIRC. |
|
| Author: | Greg Ondayko [ Tue Nov 30, 2010 8:58 am ] |
| Post subject: | |
I think Brian Nutter will have to field that one... So basically Rick is asking if there is a .114" (89.2556mm) or .124" (89.5096mm)oversize piston. My guess is now that would be a custom order?? Greg |
|
| Author: | Dart270 [ Tue Nov 30, 2010 9:35 am ] |
| Post subject: | |
Those are not currently available, only up to 0.104" over. Rick, dude, why don't you bolt together a motor for that Valiant first, and then worry about rebuilds...  Lou |
|
| Author: | Rick Covalt [ Tue Nov 30, 2010 12:59 pm ] |
| Post subject: | Just Wondering? |
Yeah, your right Lou. I was just wondering out loud. Truth is I have an engine on the stand. The problem is that the Money tree growing in my back yard is wilted pretty bad. It may be 30 more years till it hits the road!  Rick |
|
| Author: | Dart270 [ Tue Nov 30, 2010 1:49 pm ] |
| Post subject: | |
Also note that they have 3.484" piston kits too, so could bore 0.020" more after that. I just called Campbell Enterprises and they have all the piston kit sizes in stock. Lou |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|