| Slant Six Forum https://slantsix.org/forum/ |
|
| Oregon Cam Grind , no cam card in the box ??? https://slantsix.org/forum/viewtopic.php?t=40499 |
Page 2 of 2 |
| Author: | Damraider [ Mon Jun 07, 2010 10:12 pm ] |
| Post subject: | |
Well , maybe I don't know how to read the degree wheel .... I checked it twice but maybe need to do it twice more LOL !! |
|
| Author: | Dart270 [ Tue Jun 08, 2010 2:08 pm ] |
| Post subject: | |
"Degrees advance" (or retard) for a cam are measured at the crank, not at the cam... Lou |
|
| Author: | Damraider [ Tue Jun 15, 2010 2:17 pm ] |
| Post subject: | |
Well ,I brought my shortblock in to the machine shop that did the block for me and had him check it out . The cam is right on 102 degrees intake centerline , so what I did with the cam gear was correct . Looking forward to finishing up the install and seeing what it will do . Thanks, Steve |
|
| Author: | Dart270 [ Tue Jun 15, 2010 7:07 pm ] |
| Post subject: | |
Excellent! Lou |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|