| Slant Six Forum https://slantsix.org/forum/ |
|
| SuperSix at the cemetery https://slantsix.org/forum/viewtopic.php?t=40546 |
Page 2 of 2 |
| Author: | GTS225 [ Tue Jun 08, 2010 5:51 pm ] |
| Post subject: | |
Hmmmm......That's not a Mopar alternator laying over there on the far inner fender, either. Somebody went to a fair amount of trouble modifying this, and I agree with the rest of the crowd. It bears closer scrutiny. and purchase if possible. Roger |
|
| Author: | Volare4life [ Wed Jun 09, 2010 5:54 pm ] |
| Post subject: | |
where is this located ?? def negioate it down and buy, if the body is straight try selling it and everything else you don't want. take more pics......yes more pics execellent, -Mike |
|
| Author: | 62 alum [ Wed Jun 09, 2010 6:23 pm ] |
| Post subject: | |
Could that be an electric water pump or just a different looking standard one. Very interesting! |
|
| Author: | ceej [ Wed Jun 09, 2010 6:40 pm ] |
| Post subject: | |
Not necessarily a disc brake front. The drum type also came with the dual cylinder you see there. My '74 had the same master cylinder on four wheel drums. I'd look it over a bit closer. If the carbs and intake are in good shape, and that's what your looking for, it's definitely worth considering. It's definitely a great conversation piece! I'm not sure if the Lynx manifold is still available. (Australia.) Triples could be a royal pain in the butt for a driver though. Your in Russia? CJ |
|
| Author: | Rost310 [ Thu Jun 10, 2010 1:35 am ] |
| Post subject: | |
The car is on sale in Finland. 400 km from me & i did`t see this car, I am going to make it in two weeks I`m in Russia |
|
| Author: | gato [ Thu Jun 10, 2010 6:04 am ] |
| Post subject: | |
how did u find it from 400km away? |
|
| Author: | Volare4life [ Thu Jun 10, 2010 7:38 pm ] |
| Post subject: | |
amazing eyesight !!!! HAHAHA |
|
| Author: | Sam Powell [ Fri Jun 11, 2010 8:39 am ] |
| Post subject: | |
That's a pretty amazing find. Hard to tell, but it looks like small bolt pattern wheels. I would think you could get the manifold, carbs and header for $300, if he does not know what he has. Have you kept a poker face? Would you be willing to swap a one barrel intake and header back on for him? That might make him open to selling just the induction and exhaust. Do you know if the header is still solid, or is it rusted through? Sam |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|