'76 is the changeover year. Some were steel, some were cast.
| Slant Six Forum https://slantsix.org/forum/ |
|
| 225 rpm limit https://slantsix.org/forum/viewtopic.php?t=41205 |
Page 2 of 2 |
| Author: | Rug_Trucker [ Wed Jul 28, 2010 8:23 am ] |
| Post subject: | |
Quote: Crank, block, and head are all a bit lighter from about 82-up. 76-77 will work just fine, though.
Lou I thought the air pump heads were heavier. |
|
| Author: | Dart270 [ Wed Jul 28, 2010 12:53 pm ] |
| Post subject: | |
There is scalloped out material removed in the casting all over the head. I think that head is '80-up. Saves about 5 lbs over a 76-79 head, and is almost as light as a 75-down drool tube head. Lou |
|
| Author: | Rug_Trucker [ Wed Jul 28, 2010 5:53 pm ] |
| Post subject: | |
Drool tubes my favorite. |
|
| Author: | slantzilla [ Fri Jul 30, 2010 7:50 pm ] |
| Post subject: | |
'76 is the changeover year. Some were steel, some were cast.
|
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|