Welcome...
Look for the numbers stamped on the block's ID pad, behind the alturnater.
DD
| Slant Six Forum https://slantsix.org/forum/ |
|
| Welcome to the new Slant Six Forum! https://slantsix.org/forum/viewtopic.php?t=4363 |
Page 2 of 4 |
| Author: | mattyhill [ Mon Jan 30, 2006 11:53 am ] |
| Post subject: | |
Yeah, just wanted to chime in on the site's ultimate righteousness! Any pin-headed, pimple-faced boy can play with a boring V-8, but I think it takes a certain, special kind of mental patient to delve into the pure magic of a slant-sixer! Thanks again! |
|
| Author: | sabre71 [ Sat Mar 18, 2006 8:10 am ] |
| Post subject: | |
hey all new here just wanted to say hi great site here . im the proud new owner of a super clean 86 d-100 /6 4 speed.. |
|
| Author: | slantedbelvedere [ Sat Apr 08, 2006 8:58 am ] |
| Post subject: | |
Wecome sabre71. This is a great place. Glad to have you here. Paul |
|
| Author: | r66cuda [ Fri Oct 20, 2006 11:41 pm ] |
| Post subject: | Newbie /6 in Northern CA |
Hi, all. just joined. I have 2 '66 'Cudas, a 273 + a 225 /6. I have a question about the 225 in my 'Cuda, if any of you happen to see this. It's not stock 225; not even sure a 225 came in a '66. Actually, I'm not even sure if it's a 225 or 170, how do I tell? It has EGR on exhaust, which is not stock in '66; no smog. On the driver's side block in large letters it's stamped 0174. I'm wondering if that's Jan., 1974? Just curious. Kool group here. |
|
| Author: | Doctor Dodge [ Sat Oct 21, 2006 9:10 pm ] |
| Post subject: | |
Welcome... Look for the numbers stamped on the block's ID pad, behind the alturnater. DD
|
|
| Author: | r66cuda [ Sat Oct 21, 2006 10:18 pm ] |
| Post subject: | Thanx, Doug! |
Hey, Doug, Wayne E. from Chico told me to look you up, I'm in Red Bluff. Had some ?'s; is that photo with head pulled, or can I see date stamp on block assembled? Rich |
|
| Author: | CStryker [ Sun Oct 22, 2006 5:20 pm ] |
| Post subject: | |
It should be visible w/ everything assembled, although the alternator bracket can make it difficult to see. That pad actually sticks out beyond the head sealing surface. If there's no stampings there, the block has probalby been decked previously. |
|
| Author: | cjh [ Fri Mar 02, 2007 3:48 am ] |
| Post subject: | |
G'day to yas all. I have just joined this forum. Looks good, well done!!! Ok, I have a 1962 SV1 Valiant Sedan, bought it in 1986, and I still have it, its the first car I have owned, have had a few since. Its currently in its second total rebuild, still with s/6. It must be weird to change gears with your right hand???? Whats it like to get bits and pieces over there??? for the 'S'??? |
|
| Author: | slantfin [ Tue Mar 27, 2007 7:54 am ] |
| Post subject: | G'day back |
It is weird to change gears with your right hand, especially on the column, but 'when the going gets weird, the weird turn pro.' (HST) Getting bits isn't too difficult, but would be easier for a moustang. I read the catalogs here like this, Ford, Ford, chevy, Chevy, Chevy, Ford, Ford, Pontiac, Chevvy, Chevy, Ah. 
|
|
| Author: | kafer65 [ Tue Oct 21, 2008 9:27 am ] |
| Post subject: | Greetings! First Post. |
I've visited but never posted. Now I have a 87 Dodge P/U with some sprucing up to do and thought I might be neighborly and say hello. ________ herbal vaporizers |
|
| Author: | Doctor Dodge [ Wed Oct 22, 2008 8:36 pm ] |
| Post subject: | |
Welcome... Lot's of truck owners here so you are in good company. DD |
|
| Author: | Original 62 Signet [ Mon Dec 01, 2008 10:07 pm ] |
| Post subject: | 225 complete Aluminum engine |
Can anyone help with obtaining a Slant/6 Aluminum engine complete. For my 1962 Signet 200? |
|
| Author: | SlantSixDan [ Mon Dec 01, 2008 10:20 pm ] |
| Post subject: | |
These show up from time to time. Do you have much/any experience with the aluminum engine? Is this planned as a street or a race car? |
|
| Author: | unknownsignal [ Sat Mar 14, 2009 6:36 pm ] |
| Post subject: | Hai! |
Hello, new /6 owner here just got a 1977 Plymouth Volare from my neighbor and fellow poster who is here in the forum somewhere. Glad to have this site, nice way to explore and become familiar. THANKS!! |
|
| Author: | stephaniebrite77 [ Sat Mar 14, 2009 7:13 pm ] |
| Post subject: | |
:ahem: anyone wanna guess whose Volare that would be?  I'm glad you made it here!! |
|
| Page 2 of 4 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|