Slant Six Forum
https://slantsix.org/forum/

Hemi Dissy in 225 SL6 ?
https://slantsix.org/forum/viewtopic.php?t=45709
Page 2 of 2

Author:  olafla [ Mon Oct 10, 2011 4:50 pm ]
Post subject: 

Ray, take a look near the bottom of the Forum Index, there you'll find a section 'How to use this forum', which - among other useful info - contains a recipe for use of pics in the forum.

Olaf.

Author:  raycycled [ Wed Nov 16, 2011 5:39 pm ]
Post subject:  Timing question on Hemi Dissy in my 225 SL6

Sorry guys not had a chance to get a few pictures of this modification ,had a rear spring snap on me 2 weeks ago so that was my first priority, Now i have a timing question. I set up the Hemi Elec dissy the same as I would for the original pionts dissy , vacuum advance disconnected, idling at 750 RPM and timing set to 2 1/2 deg BTC but after doing a 600 mile trip not quite right, Any thoughts on what timing should be ? RAY

Author:  Fopar [ Wed Nov 16, 2011 6:20 pm ]
Post subject: 

Try bumping it to 10 or 12 degrees.

Richard

Author:  raycycled [ Thu Nov 17, 2011 12:21 pm ]
Post subject: 

Will give that a go Richard I was note sure why the later 225's have a different timing set up? RAY

Author:  Fopar [ Thu Nov 17, 2011 12:47 pm ]
Post subject: 

For cleaner air ??

Richard

Author:  raycycled [ Thu Nov 17, 2011 2:10 pm ]
Post subject: 

Doubt that is it maybe the cam is different after 66?, RAY

Author:  raycycled [ Sun Nov 27, 2011 2:37 am ]
Post subject: 

Sorry guys not had tiem to get photos yet, we took the Valiant away fro a weekend trip did over 500 miles and went well, had a few other issues since so been side tracked, broke a rear spring ( some moron had removed a leaf ) and the rear seal on the gear box went so had to fix that, but other wise the Hemi elec ignition is all good. RAY

Page 2 of 2 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/