| Slant Six Forum https://slantsix.org/forum/ |
|
| Speedo calibration https://slantsix.org/forum/viewtopic.php?t=45727 |
Page 2 of 2 |
| Author: | raycycled [ Thu Sep 22, 2011 3:42 am ] |
| Post subject: | Speedo drive gears small version |
I have done the math and my speedo is out by 7 % so if i reduce the gear drive by 1 tooth I get and increase of approx 6% in cable speed close enough for me, But my main question is where can I get the small drive gears? I have tried 3 old Chrysler suppliers here in OZ ands no luck , Mopar Market didn't have them either has any one got a second suggestion. |
|
| Author: | 65 dartman [ Thu Sep 22, 2011 4:06 am ] |
| Post subject: | |
Pat Blais aka torqueflite patty might have one of those hard-to-find gears |
|
| Author: | AussiePlymouths [ Thu Sep 22, 2011 5:42 am ] |
| Post subject: | Sounds like a plan |
Good thinking Don. If you want to try Pat he has a new email address : tflitepatty@comcast.net (tell him that you are from Downunder when you ask him). |
|
| Author: | FrankRaso [ Thu Sep 22, 2011 8:05 am ] |
| Post subject: | |
Another method of determining rear axle ratio: http://slantsix.org/forum/viewtopic.php ... 835#325835 I've found that Brewer's Performance has better prices on speedo gears. Guessing at what parts you need might be more expensive in the long run. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|