| Slant Six Forum https://slantsix.org/forum/ |
|
| crank case pressure https://slantsix.org/forum/viewtopic.php?t=46385 |
Page 2 of 2 |
| Author: | terrylittlejohn [ Thu Sep 22, 2011 5:07 pm ] |
| Post subject: | |
can you get hylomar in spray can? i just order 2 tubes on ebay |
|
| Author: | Shaker223 [ Thu Sep 22, 2011 5:11 pm ] |
| Post subject: | |
I like the tube better. I have used the spray as well. I put a small amount around each fluid hole (both sides) and left the rest dry. I also did the lifter galley rail. |
|
| Author: | olafla [ Thu Sep 22, 2011 5:20 pm ] |
| Post subject: | |
Hylomar on both sides. Olaf. |
|
| Author: | emsvitil [ Thu Sep 22, 2011 11:42 pm ] |
| Post subject: | |
Harley dealers have it. 3.5 oz Part number 99653-85 $16 |
|
| Author: | terrylittlejohn [ Fri Sep 23, 2011 4:36 am ] |
| Post subject: | |
thanks, we have a local harley dealer, i will give them a call. |
|
| Author: | terrylittlejohn [ Mon Oct 17, 2011 5:08 am ] |
| Post subject: | |
will the last race weekend is over, only got sunday in , rain on saturday,i went back to evactuation tubes to the headers and cranks pressures were fine, haven`t done a compression check yet. i just received the 2 tubes of hylmor sealer in the mail,i will try it on the next tear down, i have all winter. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|