| Slant Six Forum https://slantsix.org/forum/ |
|
| Another starter option to fit with DDDs or Hyper-Pak https://slantsix.org/forum/viewtopic.php?t=50295 |
Page 2 of 2 |
| Author: | FastFreddie [ Sat Feb 16, 2013 9:39 pm ] |
| Post subject: | |
Yes, it's designed for the early cars - I have the usual A904 three speed push button without park. I had the parking brake on the transmission removed and installed an E-body 8.75 rear end. Still trying to fine-tune the e-brake. Here is my car at a car show in Langley, BC in September '12. http://www.flickr.com/photos/canadagood/7978486070/ |
|
| Author: | Valleyant [ Sun Feb 17, 2013 1:13 pm ] |
| Post subject: | |
Quote: Yes, it's designed for the early cars - I have the usual A904 three speed push button without park. I had the parking brake on the transmission removed and installed an E-body 8.75 rear end. Still trying to fine-tune the e-brake. Here is my car at a car show in Langley, BC in September '12.
Man, that is one beautiful machine!
http://www.flickr.com/photos/canadagood/7978486070/ |
|
| Author: | 64ragtop [ Sun Feb 17, 2013 6:41 pm ] |
| Post subject: | |
I'll second that comment!!! ATB BC |
|
| Author: | FastFreddie [ Sun Feb 17, 2013 9:42 pm ] |
| Post subject: | |
Here is an under-the-hood shot: http://www.flickr.com/photos/93360057@N ... hotostream |
|
| Author: | Rick Covalt [ Tue Jan 28, 2014 2:17 pm ] |
| Post subject: | |
Has anyone tried one of these truck starters out yet? I may have need for one of them soon. Advance has them for about $130 Rick |
|
| Author: | Rick Covalt [ Fri Jan 31, 2014 2:41 pm ] |
| Post subject: | |
Ok, I ordered one of these and I have a motor lying on the floor. I will mount a Belhousing and the Hyper pak rear manifold and see if it fits! I'll let you all know for $5 each!!!  I will get a picture posted early next week.Thanks to Dan for the heads up on this. Rick |
|
| Author: | Sam Powell [ Sat Feb 01, 2014 4:24 am ] |
| Post subject: | |
Quote: Yes, it's designed for the early cars - I have the usual A904 three speed push button without park. I had the parking brake on the transmission removed and installed an E-body 8.75 rear end. Still trying to fine-tune the e-brake. Here is my car at a car show in Langley, BC in September '12.
Cool ride! Nice album too. I enjoyed it all. My favorite, if you have to have one, was the old Studebaker. Styling was about 50 years ahead of its time. I wonder if it was a Raymond Lowey design?http://www.flickr.com/photos/canadagood/7978486070/ Sam |
|
| Author: | Rick Covalt [ Tue Feb 04, 2014 1:14 pm ] |
| Post subject: | Starter pics |
Ok the new starter looks like it should work great. More Pics are at the hyperpak thread below.  http://slantsix.org/forum/viewtopic.php?p=399830#399830 |
|
| Author: | DusterIdiot [ Tue Feb 04, 2014 4:42 pm ] |
| Post subject: | Hmmm... |
I wonder how that would look on a low starter bellhousig and if the 10 tooth gear can be replaced with a 9 tooth gear easily...  Lookin' good Rick! |
|
| Author: | olafla [ Thu Feb 06, 2014 8:57 am ] |
| Post subject: | |
Seems like good clearance, Rick, that will be a nice setup! Now all we have to do is a visit to the local Mopar parts dealer to get a starter and a set of those fabulous HP manifolds...  Olaf |
|
| Author: | Rick Covalt [ Thu Feb 20, 2014 5:46 pm ] |
| Post subject: | |
I dug out two flywheels, one 10 1/2" V-8 and one slant 6. I held the new super mini starter up to the teeth to check the mesh and it looks fine. I ran it around the flywheel by hand just to be sure it should work. There you have it!
|
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|