Slant Six Forum
https://slantsix.org/forum/

Anyone use Bouchillon on the slant super six conversion?
https://slantsix.org/forum/viewtopic.php?t=60195		 Page 2 of 2
Author:  '67 Dart 270 [ Tue Oct 25, 2016 7:46 am ]
Post subject:  pics
Here is a better pic of the setup:

http://s785.photobucket.com/user/67dart ... sort=3&o=2

At least 1/2" or so from spring: http://s785.photobucket.com/user/67dart ... sort=3&o=1

Rear one: http://s785.photobucket.com/user/67dart ... sort=3&o=3

Up over the tranny: http://s785.photobucket.com/user/67dart ... sort=3&o=4

Over to passenger frame rail: http://s785.photobucket.com/user/67dart ... sort=3&o=5


along rail and to radiator: http://s785.photobucket.com/user/67dart ... sort=3&o=6

Close up of (steel) fitting: http://s785.photobucket.com/user/67dart ... sort=3&o=7


-AN to NPT 90 degree fitting: http://s785.photobucket.com/user/67dart ... sort=3&o=8

Get yourself one of these, makes braided lines slip easily into fittings: http://s785.photobucket.com/user/67dart ... sort=3&o=0

Brian
Author:  shadango [ Tue Oct 25, 2016 9:30 am ]
Post subject: 
As an aside...hey GDIZZLE....by the way, didnt mean to hijack your thread.......I figured since it was about the Bouchillion setup it would be good info to have here for someone in the future.....I can start a new thread for my trials / tribulations if preferred....
Author:  Tim Keith [ Tue Oct 25, 2016 8:10 pm ]
Post subject: 
Do you know what piece of the Bouchillon kit is the same as OEM parts ?
Author:  shadango [ Wed Oct 26, 2016 5:04 pm ]
Post subject: 
Making progress....we hope....


Fitting one of two found and installed....one left in the whole damn area.....


Female to female swivel still needed, I found on on ebay today for 5 bucks.....hopefully we will be back on track once that arrives....

Image
Image
Page 2 of 2 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/