Slant Six Forum
https://slantsix.org/forum/

When Fel-Pro No Longer Decides to Support Slants
https://slantsix.org/forum/viewtopic.php?t=62375		 Page 2 of 2
Author:  74A1Swinger [ Fri Jul 15, 2022 9:04 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants
Quote:
There's a guy on the FABO site that a has a huge pile of the distributor o rings (both, never realized that there was 2 of them used to seal a/6 distributor) he had listed for sale over there. Check out "halifaxhops". I got like 3 sets from him a couple of months ago, and recently seen that he still has quite a few.
That's cool, always good to know! Thanks for the tip. Yeah the small one I've been getting buy with just using generic o-rings from the box stores. At first I didn't know they used 2 either because my distributor was missing the large one when I got the car. But when I got my FSM I saw there were 2. That took a lot of hunting as I recall.

74
Author:  74A1Swinger [ Fri Jul 15, 2022 9:24 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants
Quote:
I am going to attempt to digitize all of the simple gaskets as time permits.

These are Laser cut on cardstock for test fitting.
Image

If they are good I will post the drawings up soon.

Greg
Greg those look nice!

And CNC-Dude sounds like you got the production down!

I know when I looked at the complete engine set I bought, the quality looked good enough to get buy, but it sure didn't stand out as being the best when compared to what they were making for some of the other engines out there.

74
Author:  Badvert65 [ Wed Aug 17, 2022 10:22 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants
Does anyone have a cad file of the slant six valve cover gasket, the mechanical cam head, not the hydro head valve cover?
Author:  CNC-Dude [ Sat Aug 20, 2022 12:50 pm ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants
I made one a while back, I'll dig it up...
Page 2 of 2 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/