Any chance you could leave one for me?
I haven't built a kit in years; might be a nice distraction
| Slant Six Forum https://slantsix.org/forum/ |
|
| 2019 Banquet -- Swap meet https://slantsix.org/forum/viewtopic.php?t=63241 |
Page 2 of 4 |
| Author: | Thebearded1 [ Wed Feb 27, 2019 8:22 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Quote:
Cool. Will be nice to meet you in person!
Definitely, finally I can put a face to the people who have given me advice along the way so far.
Greg |
|
| Author: | Rob Simmons [ Sun Mar 10, 2019 8:19 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Does anyone build plastic model kits and want more...? I have a LOT of unbuilt kits, etc. I’m starting to sell them on eBay, but if you’re looking for something (especially Mopar) I may have it. This week I will start loading up for the banquet. I’ll try to throw things in people might want. |
|
| Author: | ryandcovalt [ Sun Mar 10, 2019 2:48 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
You dont happen to have a early 60s valiant 2 door or a early 70s dart by any chance would you? i've looked around from time to time but cant find anything. |
|
| Author: | sixinthehead [ Sun Mar 10, 2019 2:49 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Any chance you could leave one for me? I haven't built a kit in years; might be a nice distraction
|
|
| Author: | slantzilla [ Sun Mar 10, 2019 4:32 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
If anyone has a Clifford intake there with the injector bosses cast in I would be very interested. |
|
| Author: | Badvert65 [ Sun Mar 10, 2019 4:46 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Yes, I wouldn't mind getting another Clifford intake as well, but I don't need injector bosses. -Matt |
|
| Author: | Charrlie_S [ Sun Mar 10, 2019 6:28 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Not sure I can make it, but if I do I'll bring a couple of Clifford intakes. |
|
| Author: | slantzilla [ Sun Mar 10, 2019 7:41 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Do you have one with bosses Charlie? |
|
| Author: | Charrlie_S [ Mon Mar 11, 2019 3:28 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Quote: Do you have one with bosses Charlie?
Yes. The new one that belonged to Cecil. The one we talked about last year. The other deal fell through, and I forgot about you. I will bring three of them, the new one, a used water heated and ceramic coated, and a older version used one. I will sell two, want to keep one.If anyone else needs anything I might have, let me know. I can't bring everything I have for sale, as I would not be bringing my truck, but will take requests. |
|
| Author: | Rob Simmons [ Mon Mar 11, 2019 8:48 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Quote: You dont happen to have a early 60s valiant 2 door or a early 70s dart by any chance would you? i've looked around from time to time but cant find anything.
The Toad models are a little harder to come by. I've found a handful, but most of them are dealer promo models already built.Here's what I have for Toads: Valiant Built 1960 PLYMOUTH VALIANT PROMO MODEL 60 dealer promotional Valiant Built 1961 Plymouth Valiant Hard Top - Built Promo Valiant Kit 1962 PLYMOUTH VALIANT*UN-BUILT*AMT Styline#189~1/25 George Barris/Car Carft Valiant Built Revell: 1962 Plymouth Valiant Sedan - Built Promo Lancer Built Revell: 1962 Dodge Lancer GT Hard Top - Built Promo Lancer Built 62 Dodge Lancer - Built white promo And here are the 70 Darts: Dart Kit 70 Dart HEMI HUNTER Dodge Dart DRAG CAR - AMT Dart Kit 70 Dart HEMI HUNTER Dodge Dart DRAG CAR - AMT Dart Kit 70 L.A. DART WHEELSTANDER BILL SHREWSBERRY - AMT Dart Kit 70 L.A. DART WHEELSTANDER BILL SHREWSBERRY - AMT Dart Kit 70 Dart - Valiant Scamp Chrysler Short-Track Late Model Sportsman Model Kit T233 - AMT Dart Built 70 Dart - Body only, So So Dart Built RAMCHARGERS 70 DODGE DART F/C MPC KIT#732-200 BUILT I will try to go through the boxes and dig out some models to bring with me. |
|
| Author: | ryandcovalt [ Mon Mar 11, 2019 2:45 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
A dealer promo model would be good too. I'm not necessarily concerned with building it so a completed one would be fine too. Basically just hoping to find something similar to my dart or race car or something that I can build/paint/modify like that someday. So i'm definitely interested in anything you think would be like that. |
|
| Author: | Greg Ondayko [ Mon Mar 11, 2019 4:13 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
I bet he just wants a model to put a nitro traxxas under and grudge race it with the 62 val!  Greg |
|
| Author: | Rob Simmons [ Tue Mar 12, 2019 10:17 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Frank Femling is looking for a set of upper control arms for his Lancer project (Penelope) He needs the original small ball joint version. He has the Wilwood disc brake kit for the original 9" drum spindle. |
|
| Author: | sixinthehead [ Tue Mar 12, 2019 11:38 am ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
What about the ones we just took off the Lemons '62? |
|
| Author: | Rob Simmons [ Thu Mar 14, 2019 2:08 pm ] |
| Post subject: | Re: 2019 Banquet -- Swap meet |
Greg O. is bringing a pair. Thanks Greg! The story is that the originals got a bit boogered up in the bushing press out/in operation. Just got home and about to start loading up. We’ve got tornado, thunderstorm and other various scary weather alerts going on. CJ rescued some lawn furniture that was headed for the lake. I’m keeping an eye on the big trees with broken limbs from the last ice storm. Hoping they don’t fall on my cars again. If we weather the storms okay tonight I’ll be headed East in the morning. It will likely take me close to 10 hours realistically. Other than Greg’s roller rockers and Lou’s head studs I failed to get from Howard Davis last weekend, do I owe anyone any parts? Here’s what I’m planning to bring: Champion trophy for presentation to Ryan ‘99 Dakota with notarized title for Ryan 198 crank and oil pump from John for Lou and Rick Leftover Reunion t shirts Whatever plastic models I can dig out I wasn’t able to make it over to the garage to dig out parts for the swap meet, but I may have a thing or two here at the house. Maybe I’ll bring some conversation pieces... Let me know if I missed anything! |
|
| Page 2 of 4 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|