| Slant Six Forum https://slantsix.org/forum/ |
|
| HR Clutch near Philadelphia PA https://slantsix.org/forum/viewtopic.php?t=64848 |
Page 2 of 2 |
| Author: | Tim Keith [ Wed May 13, 2020 3:05 pm ] |
| Post subject: | Re: HR Clutch near Philadelphia PA |
Vintage Power Wagons told me the '66 flywheel I have is for the 4 fingered pressure plate and I can't use it with the common 12-inch clutches, unless I find a 4 fingered pressure plate to rebuild. I don't yet know what kind of clutch is still on the '61 D100 with the 3 speed or whether its flywheel is drilled for the 3 finger P/P. |
|
| Author: | Jase [ Wed May 13, 2020 6:08 pm ] |
| Post subject: | Re: HR Clutch near Philadelphia PA |
NOT saying VPW is wrong, but I would drop by http://www.sweptline.org/forums/ and see what they have to say. You may get a clear answer based upon someones direct experience. |
|
| Author: | Tim Keith [ Thu May 14, 2020 6:52 pm ] |
| Post subject: | Re: HR Clutch near Philadelphia PA |
VPW said that I can have my flywheel re-drilled for the 3-finger pressure plate. I could get a used 4-finger 11-inch p/p and have it rebuilt. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|