Your quick and easy is like mine! I can take a 10 minute job and turn it into 2 hours so fast it would make your head spin!
| Slant Six Forum https://slantsix.org/forum/ |
|
| Pertronix electronic ignition https://slantsix.org/forum/viewtopic.php?t=68349 |
Page 2 of 2 |
| Author: | Rick Covalt [ Mon Jul 06, 2026 4:17 pm ] |
| Post subject: | Re: Pertronix electronic ignition |
The up side to the HEI is that you can get a module anywhere anytime for a lot less than the Petronix. Or carry a $10 one in the glove box. A Distributor, a module and some wire can't cost that much, unless you insist on a brand new distributor. |
|
| Author: | MDchanic [ Mon Jul 06, 2026 5:23 pm ] |
| Post subject: | Re: Pertronix electronic ignition |
Agreed. I just wanted something quick and easy. Ha ha ha ha ha ha ha. – Eric |
|
| Author: | Rick Covalt [ Mon Jul 06, 2026 6:04 pm ] |
| Post subject: | Re: Pertronix electronic ignition |
Your quick and easy is like mine! I can take a 10 minute job and turn it into 2 hours so fast it would make your head spin!
|
|
| Author: | MDchanic [ Wed Jul 08, 2026 12:30 pm ] |
| Post subject: | Re: Pertronix electronic ignition |
And just in case anyone was on the edge of his seat wondering, the Pertronix-I will idle down to 350 RPM (speed screw no longer touching throttle lever tab) with reasonable smoothness and no change in oscilloscope trace, which is completely different than the Pertronix-II. – Eric |
|
| Page 2 of 2 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|