beautifull
| Slant Six Forum https://slantsix.org/forum/ |
|
| Clifford Performance & Bad Service!! https://slantsix.org/forum/viewtopic.php?t=8957 |
Page 2 of 3 |
| Author: | Pierre [ Thu Apr 08, 2004 11:18 pm ] |
| Post subject: | |
I thought that they were only doing this with mopar inline 6 products because the market for them was quite slim... so in that respect I didn't blame them but now that I find out their practices also extend into their ford products as well.... bit scarry. |
|
| Author: | MattatPSB [ Fri Apr 09, 2004 12:15 am ] |
| Post subject: | Dutra Exhausts |
How about manufacture contact info on Dutra Exhaust? Matt at PSB |
|
| Author: | Pierre [ Fri Apr 09, 2004 12:18 am ] |
| Post subject: | |
That'd be Doug Dutra himself. His user name on this board is Doc and Doctor Dodge... check this out... http://www.dutra.org/doug/doug-sl6-exha ... xhaust.htm |
|
| Author: | MTSteve [ Fri Apr 09, 2004 11:33 am ] |
| Post subject: | |
Matt 114 w + 47.5 n = Snowbowl?!!! My old stomping grounds! I'm in the Bozone now but would love to hook up with another in-liner in MT. I've got a head in MSO that I'm planning to rework in the fall and am looking to find someone that knows slants, as this will be my first build-up. I'm headed your way today for the Easter weekend. You can PM me there at my folks: rjmal@montana.com Just put For MTSteve in the subject so I can find it. MTSteve (111 w, 45.6 n) |
|
| Author: | Matt At PSB [ Wed Apr 14, 2004 11:16 pm ] |
| Post subject: | No parts yet 4/15/04; ordered on 11/22/03 |
I have yet to receive any exhaust manifold from Clifford. Larry says"Whenever" and is rude to me on the phone. So, if you are ordering things from this company you have not been paying attention to these posts. Just one man's expeirence. Good luck Matt at PSB |
|
| Author: | Matt at PSB [ Mon Apr 19, 2004 9:12 pm ] |
| Post subject: | Clifford & Bad Service |
I cancelled my 11/22/03 outstanding order with Clifford on Friday 4/15/04. They could not deliver the exhaust header that I ordered & paid for with a company check in Novemeber, 03. I wonder how long the refund will take? I'll keep you posted. Good news! Hooker header # 5834 will work & fit with a Clifford water heated intake. It takes some custom made spacers (washers), but otherwise it is no big deal. I just got a freshly rebuilt 225, with the Hooker header on it, running today. More info as it becomes available. I sincerely hope this posting string serve to warn others about Clifford Performance. Matt at PSB |
|
| Author: | Matt at PSB [ Sat May 01, 2004 9:36 am ] |
| Post subject: | The end of the story with Clifford. |
I received the refund check in full from Clifford Perfomance (CP) for the oder I placed & paid for on 11/20/03. The refund check arrived on 4/29/04. The order for the 225 81 W150 truck exhaust headers was canceled on 4/15/04. The order was canceled because CP could not provide the exhaust headers in 5 months & my customer with the W150 was not going to wait another day. The Hooker single outlet exhaust headers required slight modification and then they work well with the CP water heated intake manifold & a Edlebrock (Carter) AFB 500 CFM four barrel carb. The 81 W150 runs great without any problems. For the record: CP makes good quality, well engineered stuff. They just can't deliver it in anything resembling a reasonable amount of time. Additionly, they are piss-poor "story" tellers when it comes to explaining the fifth or sixth two or three week delay on your parts. CP is consistant at the qualities outlined in this paragraph. CAVEAT EMPTOR!! ! Matt at PSB |
|
| Author: | johnny p [ Mon May 03, 2004 9:32 pm ] |
| Post subject: | Where to get these dutra duals? |
I would like to look at these dutra duals and maybe order some. I need headers for a 66 dart with a 225 and was thinking about going with clifford. But from what i see that could be a mistake. If someone could tell me where to go online to see these dutra duals i would appreciate it. THanks. |
|
| Author: | steponmebbbboom [ Tue May 04, 2004 3:58 am ] |
| Post subject: | |
www.dutra.org |
|
| Author: | Doctor Dodge [ Wed May 05, 2004 1:27 am ] |
| Post subject: | |
Here is a nice set of dual Dutra manifolds to look at, Jet Hot coated for that nice street rod look. http://www.dutra.org/doug/doug-sl6-exha ... ed-set.jpg DD |
|
| Author: | Tom Drake [ Wed May 05, 2004 11:21 am ] |
| Post subject: | |
Those are relly cool. Do you know how much they charged for that? Tom Drake |
|
| Author: | Doc [ Wed May 05, 2004 12:41 pm ] |
| Post subject: | |
Quote: Those are relly cool. Do you know how much they charged for that?
$125.00 for coating the two manifolds, shipping was extra.Tom Drake We will have to see how well the coating holds-up, sometimes they get dull looking after a while. DD |
|
| Author: | Matadem [ Wed May 05, 2004 12:53 pm ] |
| Post subject: | |
| beautifull
|
|
| Author: | Flyntgr [ Wed May 05, 2004 6:44 pm ] |
| Post subject: | DDD exhausts |
DD, are those babies the ones I ordered? Are they on their way here? They look mawvelous, whose ever they are. Thanks. |
|
| Author: | HellBellyD100 [ Wed May 05, 2004 8:35 pm ] |
| Post subject: | Well Done Doug! |
I'm glad you guys stepped up and warned me about Clifford's customer service! Doug, Those Duals look sweet! Outstanding work! Looking forward to purchasing a pair when I get to that point with my 1965 Utiline resto. Still working on the body and floors at this point! Doug i'll put your link up over on my site as well. |
|
| Page 2 of 3 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|