Slant Six Forum
https://slantsix.org/forum/

Windage Trays - Interest
https://slantsix.org/forum/viewtopic.php?t=64691		 Page 11 of 14
Author:  Rick Covalt [ Sat Jul 16, 2022 1:15 pm ]
Post subject:  Re: Windage Trays - Interest
The new windage trays will be $175 plus the shipping. (2 years ago they were about $15-20shipping if I remember correctly). I have made a couple minor changes to the "Jeffrey" design that should improve it slightly. These will be lazer cut so it should be a little nicer piece to start with. The welds out at at the edge have been moved to the inside and that will give them a little extra room at the pan edge.

If you want one send me a $100 to hold one for you and I'll collect the remainder when I ship them. I will wait 3 or 4 weeks then I will get metal cut and sent to me. Once it is in hand it should only take a week or two and then they will be done. Only hold up may be the machine shop time for the bolts but I think we should be good.

Personal Check or Paypal is fine.
rcovalt@embarqmail.com ( Please use the e-mail for Paypal only. Contact by PM on here preferred)

***Don't forget to send your real name & address with the payment

My Mailing:
Rick Covalt
5980 Milky Way
Waynesboro, Pa 17268

Thanks Chuck! You will get a donation for the site also! :D
Author:  Rick Covalt [ Mon Jul 18, 2022 4:49 pm ]
Post subject:  Re: Windage Trays - Interest
I sent out 20 PM's today to all the people that requested to be notified. Consider yourself notified! :D :D If you know someone who was wanting one, have them log in here and contact me ASAP.
Author:  Rick Covalt [ Wed Jul 27, 2022 2:55 pm ]
Post subject:  Re: Windage Trays - Interest
I have only heard from 2 people so far.
Author:  Rick Covalt [ Sun Jul 31, 2022 1:04 pm ]
Post subject:  Re: Windage Trays - Interest
Quote:
I sent out 20 PM's today to all the people that requested to be notified.
Still have 18 PM's in the out box. I'm sure as soon as I build 10 the other 10 will want them! :?
Author:  NCDemon1971 [ Wed Aug 03, 2022 10:48 am ]
Post subject:  Re: Windage Trays - Interest
Pm replied...
Author:  NCDemon1971 [ Wed Aug 03, 2022 3:50 pm ]
Post subject:  Re: Windage Trays - Interest
Paypal funds sent. Thanks!
Author:  Walter Lee Jackson [ Thu Aug 04, 2022 10:54 am ]
Post subject:  Re: Windage Trays - Interest
Will this include the bolts necessary to attach the tray?

If so, I'll immediately order two.

--Walt Jackson
Author:  Rick Covalt [ Thu Aug 04, 2022 1:32 pm ]
Post subject:  Re: Windage Trays - Interest
Yes , just like the previous ones. It has the new Grade 8 bolts with the heads machined and tapped for the mounting bolts. All bolts, washers, and lock nuts needed to install it are included. Thanks
Author:  Rick Covalt [ Mon Aug 08, 2022 5:15 pm ]
Post subject:  Re: Windage Trays - Interest
I plan to get the bolts over to the machine shop next week so they can get started on those. I'll wait another week or 2 to see if any more people want one, and then get the trays made.
Author:  Rick Covalt [ Sat Aug 13, 2022 5:33 pm ]
Post subject:  Re: Windage Trays - Interest
Current List.

Doug Buckley---------2
Walter Lee Jackson---2
Nick Stavale ----------1
Fred Clark-------------2
Ken Munich------------1
Michael Glass----------1
Ross Pulliam-----------2-
Mr. Norm---------------1

Please let me know if i missed you on the list . Probably wait until next Friday and then place the order for the steel. Thanks!
Author:  Rick Covalt [ Wed Aug 17, 2022 1:38 pm ]
Post subject:  Re: Windage Trays - Interest
Bolts are at the machine shop. Will likely not get them back for at least a couple weeks.

Last call on trays. I will will take orders through the week end and then get them ordered. :D :D
Author:  Rick Covalt [ Sat Aug 20, 2022 5:24 pm ]
Post subject:  Re: Windage Trays - Interest
Got the last check today. Last last call. Order is going in SCS for trays tomorrow or Monday.

Rick
Author:  Rick Covalt [ Fri Aug 26, 2022 6:07 pm ]
Post subject:  Re: Windage Trays - Interest
Just got confirmation that the windage trays are in production / laser cutting. They are expected to ship to me on Sept 1st. Just wanted to keep you all in the loop.
Author:  Rick Covalt [ Sun Sep 04, 2022 1:55 pm ]
Post subject:  Re: Windage Trays - Interest
Trays arrived. They look great! :D :D It will probably be a couple more weeks until the machining is done on the bolts. I have all the other hardware in hand.
Attachment:
IMG_5886.JPG
IMG_5886.JPG [ 65.93 KiB | Viewed 2730 times ]
Author:  Rick Covalt [ Tue Oct 18, 2022 9:14 am ]
Post subject:  Re: Windage Trays - Interest
Windage trays are all bent and the brackets are bent as well. Will test fit them to an actual engine this evening and then Robbie should weld them all up by the end of the week. Just waiting on the machine shop and bolts.
Page 11 of 14 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/