I am in Ontario, on the Bruce Peninsula if you know where that is.
I might end up getting it shipped to my wife's grandparents in Florida, then they can ship it to me USPS.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Erson Cam Group Buy https://slantsix.org/forum/viewtopic.php?t=21400 |
Page 12 of 20 |
| Author: | sandy in BC [ Fri Sep 28, 2007 8:33 am ] |
| Post subject: | |
If your paperwork is not correct Canadian Border Services will just direct you to a broker. We do all our own export/import paperwork..... My son imported over $6000 worth of stuff (including my Erson cam) this week..... no broker |
|
| Author: | Crazy Dart [ Fri Sep 28, 2007 10:15 am ] |
| Post subject: | |
Quote: If your paperwork is not correct Canadian Border Services will just direct you to a broker.
Pretty neat indeed.
We do all our own export/import paperwork..... My son imported over $6000 worth of stuff (including my Erson cam) this week..... no broker |
|
| Author: | moparfreak77 [ Fri Sep 28, 2007 3:03 pm ] |
| Post subject: | |
I am in Ontario, on the Bruce Peninsula if you know where that is. I might end up getting it shipped to my wife's grandparents in Florida, then they can ship it to me USPS.
|
|
| Author: | Crazy Dart [ Thu Oct 04, 2007 7:45 pm ] |
| Post subject: | |
Called today, group buy still on. |
|
| Author: | Doctor Dodge [ Fri Oct 12, 2007 7:36 pm ] |
| Post subject: | |
bump |
|
| Author: | Crazy Dart [ Fri Oct 12, 2007 10:08 pm ] |
| Post subject: | |
Got my cam, lifters, springs, & retainers today. The guy at Erson was great, extremely helpful and helped me figure out what was best for my application. I appreciate the person who initiated this group buy and want to thank you. This was extremely helpful in many ways. |
|
| Author: | kfox [ Wed Nov 07, 2007 4:05 am ] |
| Post subject: | |
Bringing this back up to let everyone know this is still a good deal. I talked to Tom a couple of days ago, and at his request I sent my old cam to him so he could compare the oiling slots on a hyd. cam. Anyone needing a mild hyd. cam will bw able to get the factory type oiling now. My thanks to NewLancerMan and Tom McGibbon for this great group buy. ken |
|
| Author: | Rob64GT [ Thu Dec 20, 2007 8:30 am ] |
| Post subject: | |
Ordered cam lifters springs and retainers today. Good pricing and Tom did a semi custom grind. Great service! |
|
| Author: | 66aCUDA [ Mon Feb 11, 2008 3:13 pm ] |
| Post subject: | Bump |
Bumping this up. Its still current Frank |
|
| Author: | NewLancerMan [ Mon Feb 11, 2008 7:17 pm ] |
| Post subject: | |
Quote: My thanks to NewLancerMan and Tom McGibbon for this great group buy.
You're quite welcome, it has certainly worked out well for everyone. ken 
|
|
| Author: | CARS [ Tue Feb 12, 2008 7:10 am ] |
| Post subject: | |
If Erson is going to keep this available for everyone why don't a mod post the contact info and list what is available as a sticky? |
|
| Author: | '68signet [ Sun Feb 24, 2008 1:20 pm ] |
| Post subject: | |
I'm going to call Erson tomorrow (Monday) and order a 254 RV10M cam (PN E470301) and lifters . Another thanks for this great opportunity! |
|
| Author: | NewLancerMan [ Sun Feb 24, 2008 3:26 pm ] |
| Post subject: | |
Quote: If Erson is going to keep this available for everyone why don't a mod post the contact info and list what is available as a sticky?
Good suggestion CARS, thanks to Dan for doing it in the "Parts for Sale" section.MJ |
|
| Author: | pinkiedog64 [ Mon Feb 25, 2008 12:02 am ] |
| Post subject: | |
MJ- I emailed you about getting cam # E470302. I will try and order it soon. Thanks, Stephan Nelle |
|
| Author: | 68barracuda [ Mon Feb 25, 2008 6:20 am ] |
| Post subject: | |
Hi All What is erson's URL The web addres I get through Mr. Gasket does not work so well 
|
|
| Page 12 of 20 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|