| Slant Six Forum https://slantsix.org/forum/ |
|
| Erson Cam Group Buy https://slantsix.org/forum/viewtopic.php?t=21400 |
Page 16 of 20 |
| Author: | Dart270 [ Tue Mar 17, 2009 6:32 am ] |
| Post subject: | |
Great news, DI. What cam profile did you order? Lou |
|
| Author: | emsvitil [ Tue Mar 17, 2009 4:17 pm ] |
| Post subject: | Oiling holes... |
Did they get the rear oiling hole alignment problems fixed? |
|
| Author: | armyofchuckness [ Thu Mar 19, 2009 2:05 pm ] |
| Post subject: | |
Got mine in a few days ago. Even though they said there was a delay it wasn't more than a week wait. The prices are still accurate, so take advantage of it while you can! (Also, I got the 280/270 profile.) |
|
| Author: | DusterIdiot [ Thu Mar 19, 2009 8:25 pm ] |
| Post subject: | Lol... |
Quote: Did they get the rear oiling hole alignment problems fixed?
I'll let you know when my cam shows up...Quote: What cam profile did you order?
I got the "Lou" special, but opted for a different LSA and had the advance ground into it a bit...  -D.Idiot |
|
| Author: | Dart270 [ Fri Mar 20, 2009 4:43 am ] |
| Post subject: | |
Wider or narrower LSA? Turbo plans? Good idea to get more advance ground in. Might save time on degreeing. Lou |
|
| Author: | armyofchuckness [ Fri Mar 20, 2009 5:13 am ] |
| Post subject: | |
Ha! The "Lou Special." Considering how many of these cams they've sold, they should call it that. "I'll have a 'Lou Special' to go...FAST." |
|
| Author: | Al T [ Fri Mar 20, 2009 10:45 am ] |
| Post subject: | Received mine today . . |
Had a great discussion with John a couple of weeks back wrt my blower cam. Received my "special grind" cam this week. $128. . . Fed Ex shipping & handling to Calgary was $16.90. What a deal! Working thru their lobe offerings, settled on (at 0.050") Intake -opens at 1'BTDC -closes at 39' ABDC - 220 duration, 0.310" lobe lift Exhaust - opens at 39' BBDC - closes at 1' ATDC - 220 duration, 0.315 lift Overlap 2' Lobe separation angle 109' |
|
| Author: | DusterIdiot [ Fri Mar 20, 2009 6:02 pm ] |
| Post subject: | Wow...I mean Wow! |
Mine came today too... and now I have some speed stickers...LOL.... It looks really nice, oil hole look to be in the right places, probably when I get a chance to fool about I'll check to make sure they are in good alignment and drilled right. Now if my arfing rings would get here I could get started... more soon... -D.idiot |
|
| Author: | terrylittlejohn [ Fri Mar 20, 2009 6:03 pm ] |
| Post subject: | |
it`s good to hear that they can ship to canada now. |
|
| Author: | Adrenalin [ Wed Apr 01, 2009 9:52 am ] |
| Post subject: | Tel No |
Dear All, I live in turkey and want to order a RV15M for my truck. I can not call (800) numbers. Is there any number that I can call internationally and place an order? Thank you |
|
| Author: | Doc [ Wed Apr 01, 2009 12:28 pm ] |
| Post subject: | |
Erson Cams 16 Kit Kat Drive, Mound House, NV 89706 (775) 246-4062 DD |
|
| Author: | sandy in BC [ Wed Apr 01, 2009 2:05 pm ] |
| Post subject: | |
What an awesome address! I wonder if the Kit Kat is a bar or brothel...... |
|
| Author: | emsvitil [ Wed Apr 01, 2009 2:24 pm ] |
| Post subject: | |
Quote: What an awesome address!
I wonder if the Kit Kat is a bar or brothel...... A Kandy Bar.......... |
|
| Author: | emsvitil [ Wed Apr 01, 2009 2:55 pm ] |
| Post subject: | Re: Wow...I mean Wow! |
Quote: Mine came today too... and now I have some speed stickers...LOL....
It looks really nice, oil hole look to be in the right places, probably when I get a chance to fool about I'll check to make sure they are in good alignment and drilled right. Now if my arfing rings would get here I could get started... more soon... -D.idiot So, how is the oil hole? |
|
| Author: | Joshie225 [ Wed Apr 01, 2009 3:36 pm ] |
| Post subject: | Re: Wow...I mean Wow! |
Quote: Quote: It looks really nice, oil hole look to be in the right places...
more soon... -D.idiot So, how is the oil hole? |
|
| Page 16 of 20 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|