| Slant Six Forum https://slantsix.org/forum/ |
|
| Anybody have an 64-66 factory swaybar? https://slantsix.org/forum/viewtopic.php?t=17235 |
Page 3 of 3 |
| Author: | sandy in BC [ Fri Apr 28, 2006 8:39 pm ] |
| Post subject: | |
OK....lets understand that the bar mounts are no lower than the valance, bottom of the K-member...cross link....exhaust etc. It is really not an issue you would worry about if you saw it in person. Like many of us I drive my car (and my son drives my car) everywhere . In this part of the world that means places many people would not take a SUV. I dont even get grass stuck in the bar mounts.... Who started this myth anyways? 
|
|
| Author: | gmader [ Fri Apr 28, 2006 8:57 pm ] |
| Post subject: | |
Hey, I recognize that car! Sandy, I feel complimented that you remembered how I worked this out. Greg |
|
| Author: | NewLancerMan [ Fri Apr 28, 2006 9:54 pm ] |
| Post subject: | update |
Ok I've found a stock swaybar to use as a prototype. I need to order the metal and have it sent to the bender. It would be cheaper to order all the metal material at one time. I wasn't able to get a per ft cost today but should get it early next week. If you would like to be included in the first batch, please email me directly with the word "swaybar" in the subject line. Also send me your address and contact information. Once I have a rough idea of how much metal to order, then I'll get a better idea of the actual price and will report that to everyone interested before we go ahead with it. I'm getting one regardless, but I would just rather everyone be apraised beforehand. |
|
| Author: | relic-lover [ Sat Apr 29, 2006 10:00 am ] |
| Post subject: | Count me in |
Add me to the list for two front sway bars. (As long as the price doesn't get too exorbitant) Any information available on adding the tabs to 61 and 63 lca would be appreciated also. |
|
| Author: | NewLancerMan [ Sat Apr 29, 2006 7:26 pm ] |
| Post subject: | |
I'm investigating the tabs being fabricated for A bodies. The guy I'm speaking with has made B/E body tabs, so I'm sure he can do A, they're just in a different spot. I think his price was a little under $40 for a set. MJ |
|
| Author: | Dart270 [ Sun Apr 30, 2006 3:52 am ] |
| Post subject: | |
Menko, Keep us up on price and I'll likely order 2. Al and all, I am moving to Blacksburg, VA for a new job at Virginia Tech University. Moving in about 2 months. Only 3 hrs NW of Chapel Hill, so not too far. Lou |
|
| Author: | dakight [ Sun Apr 30, 2006 6:58 am ] |
| Post subject: | |
Menko, I'm pretty sure i will want one. Before I make a firm commitment I need to know the price and delivery schedule. |
|
| Author: | NewLancerMan [ Sun Apr 30, 2006 9:42 am ] |
| Post subject: | |
I will give a good estimate of price once I have the materials, labor, and shipping costs. Likely, if I have a batch done all at one time, then it will be cheaper as they will already have the machine setup to run the bars. I'm still trying to figure out the endlink style so I'll keep you guys posted. MJ |
|
| Author: | Hyper'72Valiant [ Sun Apr 30, 2006 11:45 pm ] |
| Post subject: | |
Are you going to be making some that will work on a '72 Valiant? If so, I am interested in one. Cory |
|
| Author: | NewLancerMan [ Mon May 01, 2006 8:37 am ] |
| Post subject: | |
Cory, You're the second person that has indicated interest in that setup. I don't personally have a 67-72 swaybar, but if 65Dartman would let me borrow the one he has purchased through me (its a long story) its possible I could have some made, if there is enough interest for the trouble. Of course I dont have a car that it will fit, so this was really about stuff that would fit *my* cars  But if things work out on this, I think we could arrange that. MJ |
|
| Author: | DionR [ Thu Mar 22, 2007 1:39 pm ] |
| Post subject: | |
Whatever happened with this? |
|
| Page 3 of 3 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|