I will take a 270 cam for a project engine. Thanks Ron Parker
It Aint Over Until I Win
| Slant Six Forum https://slantsix.org/forum/ |
|
| Erson Cam Group Buy https://slantsix.org/forum/viewtopic.php?t=21400 |
Page 3 of 20 |
| Author: | dakight [ Sun Jan 14, 2007 3:52 am ] |
| Post subject: | |
Put me down tentatively for a 270. I'll make a final decision when I see the pricing. |
|
| Author: | Ron Parker [ Sun Jan 14, 2007 5:51 pm ] |
| Post subject: | |
I will take a 270 cam for a project engine. Thanks Ron Parker It Aint Over Until I Win |
|
| Author: | HyperValiant [ Sun Jan 14, 2007 7:25 pm ] |
| Post subject: | |
Like Dakight,I would be interested in a 270 when pricing is finalized,that would be just about the perfect cam for the future 225 for my Dart. HyperValiant |
|
| Author: | NewLancerMan [ Sun Jan 14, 2007 8:18 pm ] |
| Post subject: | |
Well we have quite a lot of interest, so I will call them on Tuesday and see what I can find out. Doc I will call you and we can talk about custom/dual pattern stuff as well MJ |
|
| Author: | aabbcco [ Mon Jan 15, 2007 11:18 am ] |
| Post subject: | I'm in for one |
I'm interested in a 254. if my budget allows, i may go for a 270 too. |
|
| Author: | MOPAR_64 [ Mon Jan 15, 2007 9:40 pm ] |
| Post subject: | |
yeah im def interested in a 270...thanks |
|
| Author: | Rick [ Mon Jan 15, 2007 10:21 pm ] |
| Post subject: | |
I didnt specify which cam I wanted before. I'd like the 254 please |
|
| Author: | rosspulliam [ Tue Jan 16, 2007 8:28 am ] |
| Post subject: | |
Sign me up for a 280  .
|
|
| Author: | AnotherSix [ Tue Jan 16, 2007 9:22 am ] |
| Post subject: | |
I will be in for one. A 254 or 270, unless there are to be some custom grinds available. I really want something in between the two. It is looking like the smaller cam with some 1.6 roller rockers might be what I settle on. |
|
| Author: | 60 Pioneer [ Tue Jan 16, 2007 11:02 am ] |
| Post subject: | |
I might be interested in the 270. My only concern is how my stock trans/converter/rearend will handle that grind after my head/block work (porting, o/s valves, 9:1 comp, dual 1bll). Most of my driving will be in town. Any thoughts? Thanks |
|
| Author: | NewLancerMan [ Tue Jan 16, 2007 3:55 pm ] |
| Post subject: | |
I've not run the 270 before, but I know there are people on the board who have, so maybe post a new thread to find out their thoughts. FWIW I was planning on running the same combo. MJ |
|
| Author: | NewLancerMan [ Tue Jan 16, 2007 4:04 pm ] |
| Post subject: | Order update |
Folks, Spoke to them today, trying to arrange pricing but it looks like it would be around $130 per cam. I am still waiting to get clearance from the head manager for this deal, but it seems pretty positive. Now the really hopeful news--custom grinds may be available on any profile they carry. take a look at their catalog on p.95 for possible profiles to start with. Also, questions posed earlier: Blanks: they are new blanks from EP Lash: can set tighter, about .12-.14 intake, .14-.16 exhaust I think that covers it. MJ |
|
| Author: | GTS225 [ Tue Jan 16, 2007 4:10 pm ] |
| Post subject: | |
Two questions; Does the $130 include shipping? (Probably not) Will these cams be shipped to you, then distributed, or drop shipped directly to individual buyers? Roger |
|
| Author: | emsvitil [ Tue Jan 16, 2007 4:58 pm ] |
| Post subject: | Re: Order update |
Quote:
Now the really hopeful news--custom grinds may be available on any profile they carry. take a look at their catalog on p.95 for possible profiles to start with.
Got a link to page 95? |
|
| Author: | HyperValiant [ Tue Jan 16, 2007 6:41 pm ] |
| Post subject: | |
130 Dollars sounds reasonable to me. HyperValiant |
|
| Page 3 of 20 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|