Pistons are 425grams. I don't have a weight on the pins. Comp. ht. is 1.455". Appx .300" shorter to fit the new rod. Dome is .250" thick.
| Slant Six Forum https://slantsix.org/forum/ |
|
| New K1 connecting 7.005" rod design https://slantsix.org/forum/viewtopic.php?t=29565 |
Page 3 of 5 |
| Author: | k1tom [ Fri Jul 18, 2008 6:14 pm ] |
| Post subject: | |
Due to the debate on which combination everyone wanted to go with, we did get off to a late start but the rods are in process and we are doing our best to finish them. Thanks, Tom |
|
| Author: | Shaker223 [ Fri Jul 18, 2008 6:54 pm ] |
| Post subject: | |
Tom, My order has been in for a few weeks with Chuck@Best. |
|
| Author: | k1tom [ Fri Jul 18, 2008 8:15 pm ] |
| Post subject: | |
Chuck and Pete are real good people. |
|
| Author: | Shaker223 [ Fri Jul 18, 2008 8:44 pm ] |
| Post subject: | |
I've been friends with Chuck 20+ years. Worked on stuff with him way before Best. |
|
| Author: | k1tom [ Sat Jul 19, 2008 4:32 am ] |
| Post subject: | |
I have only known them for about 3+ years but they have always done exactly what they said they would do and I have always enjoyed talking with them. |
|
| Author: | Shaker223 [ Mon Jul 21, 2008 7:25 pm ] |
| Post subject: | |
Pistons are in! I'll get some pics in the next few days. |
|
| Author: | ceej [ Mon Jul 21, 2008 7:34 pm ] |
| Post subject: | |
Who is handling sales on the west coast? CJ |
|
| Author: | Shaker223 [ Mon Jul 21, 2008 7:36 pm ] |
| Post subject: | |
I called Brian @ Wiseco directly. |
|
| Author: | Shaker223 [ Tue Jul 22, 2008 6:48 pm ] |
| Post subject: | |
Pistons are 425grams. I don't have a weight on the pins. Comp. ht. is 1.455". Appx .300" shorter to fit the new rod. Dome is .250" thick.
|
|
| Author: | Dart270 [ Tue Jul 22, 2008 7:22 pm ] |
| Post subject: | |
Sounds good. So, can we order a package of rods, rings, and pistons? Or, should I call K1 and Wiseco separately? Thanks, Lou |
|
| Author: | Shaker223 [ Tue Jul 22, 2008 7:34 pm ] |
| Post subject: | |
Since I was doing a turbo piston it wasn't going to be part of the "package" but they do have the specs now if anyone wants to duplicate it. I'm not sure if they have worked out the ording details between the 2 companies yet for the "standard package". I bought the pistons as a complete assembly==>Piston,pin,locks,rings |
|
| Author: | k1tom [ Tue Jul 22, 2008 8:09 pm ] |
| Post subject: | |
Brian and I work together on many projects. You can call either one of us and we will do our best to help put together the parts that you need. You can reach me at the following phone number or e-mail. Tom Molnar K1 Technologies Phone: 616-583-9700 E-mail: tom.m@k1technologies.com |
|
| Author: | Dart270 [ Wed Jul 23, 2008 10:40 am ] |
| Post subject: | |
Thanks very much, Tom. I will give you a call in the next few days. I also have another goofy rod request for a second set for me (easy mod to your design). Shaker, thanks for pic - WOW. Lou |
|
| Author: | MJF [ Wed Aug 20, 2008 6:49 am ] |
| Post subject: | |
Are these available as little longer? I´d need ~7.15" rod. |
|
| Author: | k1tom [ Wed Aug 20, 2008 8:42 am ] |
| Post subject: | |
Quote: Are these available as little longer? I´d need ~7.15" rod.
We can make longer versions of this rod but they will be custom pieces which are more expensive.Tom |
|
| Page 3 of 5 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|