Slant Six Forum https://slantsix.org/forum/ |
|
Head CC https://slantsix.org/forum/viewtopic.php?t=38351 |
Page 3 of 3 |
Author: | dakight [ Sun Dec 27, 2009 9:02 am ] |
Post subject: | |
Thanks for the heads-up on that. I double checked the cam card; the intake closing time above was incorrect, it should have been 52, not 47. I reran the numbers with a .100 deck cut to bring the deck clearance to .086 and come up with SCR of 10.2 and DCR of 8.9. That's installing the cam straight up. If I were to retard it 4* then I would have DCR of 8.6 - I could deck the block .110 and have DCR at 8.87. I'm assuming that retarding the cam would mean adding 4* to the the timing events to bring the intake close to 56* from 52. *edit* FWIW... the cam card has "111 LC" on it, is that the same as LSA? |
Page 3 of 3 | All times are UTC-07:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |