Quote:
I expect the turbo is also going to damp the sound?
That's what I would think. Greg
| Slant Six Forum https://slantsix.org/forum/ |
|
| Slant 6 turbo project https://slantsix.org/forum/viewtopic.php?t=54579 |
Page 3 of 10 |
| Author: | Greg Ondayko [ Thu Mar 06, 2014 9:04 am ] |
| Post subject: | |
Quote:
I expect the turbo is also going to damp the sound?
That's what I would think. Greg |
|
| Author: | Thomas S [ Tue Apr 08, 2014 11:33 am ] |
| Post subject: | |
Hello, some pics of my Valiant 
|
|
| Author: | Thomas S [ Tue Apr 08, 2014 11:39 am ] |
| Post subject: | |
 AEM afr gauge   Rebuild mechanism for the new Engine. Easy to connect and disconnect the one barrel carb when its time for swap 
|
|
| Author: | billdedman [ Tue Apr 08, 2014 10:58 pm ] |
| Post subject: | Nice '66... |
Pretty car!!! 
|
|
| Author: | Thomas S [ Wed Apr 09, 2014 1:19 pm ] |
| Post subject: | |
Thank you Bill, I have read about your nice , good looking racing Valiant. And your building process, For me it took 25 years to finish ( im nearly there) I had a valiant when i was about 25 and now im soon 50..My dream was to build a engine like this. It took 25 years to come thru and i have spent more money than a used corvette cost. 
|
|
| Author: | MJF [ Wed Apr 09, 2014 8:44 pm ] |
| Post subject: | |
Nice looking Valiant. Just perfect sleeper for turbo engine
|
|
| Author: | billdedman [ Wed Apr 09, 2014 10:35 pm ] |
| Post subject: | Thanks!!! |
Thanks for the kind words, both of you. We have more money than I would care to admit in this old tub, but we're hoping for the best when we head for the strip after 4+ long years of hard work, so pray for us... Bill in central Arkansas |
|
| Author: | mrhollywood [ Thu Apr 10, 2014 6:50 pm ] |
| Post subject: | |
what are the coils from? |
|
| Author: | Thomas S [ Fri Apr 11, 2014 12:08 am ] |
| Post subject: | |
The coils are coming from a Audi (  ) v6 2.6 - 99 aboutFound at the junk yard + one extra Thomas |
|
| Author: | Thomas S [ Sat Apr 12, 2014 12:43 pm ] |
| Post subject: | |
Thanks MJF I want to keep it as a sleeper. But i probably need more tire than stock...  I try to keep the stock look, with the center caps and balloon style tire even if i use wider14 inch rims Thomas |
|
| Author: | Rug_Trucker [ Sat Apr 19, 2014 8:00 pm ] |
| Post subject: | |
So when do you start shipping complete kits????!!!!!! 
|
|
| Author: | Thomas S [ Sun Apr 20, 2014 9:18 am ] |
| Post subject: | |
Quote: So when do you start shipping complete kits????!!!!!!
When the ship is safe in harbor
|
|
| Author: | Thomas S [ Sun Apr 20, 2014 9:27 am ] |
| Post subject: | |
Civinco computer and Davies Craig controller for electric waterpump in the glovebox 
|
|
| Author: | Volare4life [ Wed Apr 23, 2014 6:24 pm ] |
| Post subject: | |
This is a crazy build, very clean and fuel injected ??!!! Ridiculous !! Will be watching this build close, especially the component used -Mike |
|
| Author: | Thomas S [ Fri Apr 25, 2014 12:05 am ] |
| Post subject: | |
Quote: This is a crazy build, very clean and fuel injected ??!!! Ridiculous !! Will be watching this build close, especially the component used
-Mike It is crazy Mike....but The slant 6 have decide go to the future, Not because its easy but because its hard....... 
|
|
| Page 3 of 10 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|