Slant Six Forum
https://slantsix.org/forum/

Nitrous oxide
https://slantsix.org/forum/viewtopic.php?t=64297		 Page 3 of 4
Author:  Charrlie_S [ Tue Jan 07, 2020 4:11 am ]
Post subject:  Re: Nitrous oxide
I removed the plate system from my 66 Valiant, and installed the fogger system, I had on my Barracuda.
A self modified 1 bbl manifold, with a Holley 500 CFM 2 bbl
Author:  bigc4406 [ Tue Jan 07, 2020 10:28 am ]
Post subject:  Re: Nitrous oxide
Quote:
I removed the plate system from my 66 Valiant, and installed the fogger system, I had on my Barracuda.
A self modified 1 bbl manifold, with a Holley 500 CFM 2 bbl
I was thinking of running a Holley 500 as well with a kit but I thought it wouldn't flow enough air . did you like the plate system? my goals have changed but that was my 1st idea
Author:  Charrlie_S [ Tue Jan 07, 2020 12:44 pm ]
Post subject:  Re: Nitrous oxide
Like the fogger, better. I had two plates, stacked as a two stage. Never ran the second stage, as I wasn't really happy with the plate system. I could get more ET/MPH improvement with fewer issues with the fogger.
Author:  turbo66valiant [ Thu Jan 09, 2020 8:22 pm ]
Post subject:  Re: Nitrous oxide
hmmm, looking like I need to turn up the turbskie. :shock: :shock:
Author:  Charrlie_S [ Fri Jan 10, 2020 5:15 am ]
Post subject:  Re: Nitrous oxide
Quote:
Like the fogger, better. I had two plates, stacked as a two stage. Never ran the second stage, as I wasn't really happy with the plate system. I could get more ET/MPH improvement with fewer issues with the fogger.
Just to clarify: My plate system used a Offle manifold with a either 390 or 465 Holly 4 bbl.
The fogger used the 1 bbl manifold modified to used the big Holley 500 cfm 2bbl. mounted with the barrels parallel to the engine.
Author:  Dart270 [ Fri Jan 10, 2020 6:41 am ]
Post subject:  Re: Nitrous oxide
Glad to see you around, Ryan. Looks like there'll be two Midwest races this year - likely MoKan and US41 in Illinois. I'm hoping to make one of them...

Lou
Author:  turbo66valiant [ Fri Jan 10, 2020 12:57 pm ]
Post subject:  Re: Nitrous oxide
Quote:
Glad to see you around, Ryan. Looks like there'll be two Midwest races this year - likely MoKan and US41 in Illinois. I'm hoping to make one of them...

Lou
I would really like to, maybe two cars will show up. 8)
Author:  bigc4406 [ Fri Jan 10, 2020 1:32 pm ]
Post subject:  Re: Nitrous oxide
Quote:
hmmm, looking like I need to turn up the turbskie. :shock: :shock:
I thought turbo cars weren't scared of nitrous cars :P
Author:  slantzilla [ Sun Jan 12, 2020 10:28 am ]
Post subject:  Re: Nitrous oxide
Had a chance to dig around the shop yesterday. So far I have located the fogger system including solenoids, controller, and the manifold which is on my car. I have not found the 6 nozzles yet, will dig more for them in 2 weeks when I go down again.
Author:  Rob Simmons [ Sun Jan 12, 2020 1:59 pm ]
Post subject:  Re: Nitrous oxide
I thought you sold all that bamboozler stuff to Lou last year... :?
Author:  slantzilla [ Sun Jan 12, 2020 4:18 pm ]
Post subject:  Re: Nitrous oxide
All the plate stuff.
Author:  bigc4406 [ Wed Jan 15, 2020 4:33 pm ]
Post subject:  Re: Nitrous oxide
Quote:
Had a chance to dig around the shop yesterday. So far I have located the fogger system including solenoids, controller, and the manifold which is on my car. I have not found the 6 nozzles yet, will dig more for them in 2 weeks when I go down again.
Nice
Author:  slantzilla [ Sat Jan 25, 2020 4:23 pm ]
Post subject:  Re: Nitrous oxide
Found the nozzles today. They were right there in the drawer I thought they were in, and looked in 6 times last time. :oops:

If you're still interested shoot me a pm. :mrgreen:
Author:  Dorian [ Sat Feb 06, 2021 8:43 am ]
Post subject:  Re: Nitrous oxide
In regards to the fogger system, can I modify one from 8 nozzles off of a V8 to a slant?
Author:  slantzilla [ Sat Feb 06, 2021 1:45 pm ]
Post subject:  Re: Nitrous oxide
It's just a matter of bending lines and mounting the nozzles.

I have a fogger setup for a Slant if you're interested.
Page 3 of 4 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/