Sounds good. I'm sure I was just in a hurry and not willing to trim it. Car was plenty fast...
Lou
| Slant Six Forum https://slantsix.org/forum/ |
|
| Windage Trays - Interest https://slantsix.org/forum/viewtopic.php?t=64691 |
Page 3 of 14 |
| Author: | Dart270 [ Fri Apr 17, 2020 10:18 am ] |
| Post subject: | Re: Windage Trays - Interest |
Funny, mine did not clear my 64 Dart pan so I just left it out. Worked on the 68. Lou |
|
| Author: | slantzilla [ Fri Apr 17, 2020 1:11 pm ] |
| Post subject: | Re: Windage Trays - Interest |
I used one of Mike's trays which was a copy of the old DC tray. I had to do some grinding on it to get it in my '66 pan. |
|
| Author: | Badvert65 [ Fri Apr 17, 2020 3:30 pm ] |
| Post subject: | Re: Windage Trays - Interest |
I have an old DC windage tray in my 65 B body pan. No issues there. |
|
| Author: | drgonzo [ Fri Apr 17, 2020 8:37 pm ] |
| Post subject: | Re: Windage Trays - Interest |
I had to trim the front of my tray to fit in my '63 A-body pan. |
|
| Author: | Rick Covalt [ Sat Apr 18, 2020 6:49 am ] |
| Post subject: | Re: Windage Trays - Interest |
I had a DC tray and made a pattern of it so I would have it if needed. Mikes tray was in my race car (65) until it grenaded. I had to trim about a 1/8" off the one long edge. So these trays I am building may need everyone to "tweak" them just a bit for your engine. |
|
| Author: | Dart270 [ Sat Apr 18, 2020 7:07 am ] |
| Post subject: | Re: Windage Trays - Interest |
Sounds good. I'm sure I was just in a hurry and not willing to trim it. Car was plenty fast... Lou |
|
| Author: | Rick Covalt [ Sun Apr 19, 2020 3:08 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Attachment: New trays.JPG [ 55.76 KiB | Viewed 6155 times ]  I have begun getting the trays ready for the welder. I hope to have 10 or so of them done tomorrow and then they can go over to Robbie. For those who said you wanted one now is the time to send some money. It would be nice if you could send 50% to me now and then the rest when they are ready to ship to you. Price will be $150 plus shipping. If we ever get to race I'll be happy to bring it to and East Coast race for you. Slantzilla, has kindly ordered one and then told me to keep it and give away as a prize! Thank you very much Dennis!! My email is rcovalt@embarqmail.com for Paypal, or send me a PM and let me know you are mailing a check. To everyone please send a PM with you mailing address if you want it shipped when they are complete. Thanks, Rick Also for those asking about a scraper. CNCdude was sent a scraper and will be looking at it soon and telling us how much they would be for him to cut some out for us.Thank you Scott! More to come. |
|
| Author: | Dart270 [ Mon Apr 20, 2020 5:51 am ] |
| Post subject: | Re: Windage Trays - Interest |
Thanks, Rick! Payment sent. Lou |
|
| Author: | Badvert65 [ Mon Apr 20, 2020 7:35 am ] |
| Post subject: | Re: Windage Trays - Interest |
Thanks again Rick. You've got mail..... |
|
| Author: | Reed [ Mon Apr 20, 2020 8:16 am ] |
| Post subject: | Re: Windage Trays - Interest |
Thanks Rick! Payment sent. My first real "speed part" for my truck. 
|
|
| Author: | Rick Covalt [ Mon Apr 20, 2020 8:58 am ] |
| Post subject: | Re: Windage Trays - Interest |
Thanks to all! Bolts should be here tomorrow and then they go off for machining. Probably a couple weeks for them to get to them. |
|
| Author: | hyper_pak [ Tue Apr 21, 2020 5:55 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Rick, I sent my money. Just respond when you get it. Thanks for doing this. |
|
| Author: | justa170 [ Wed Apr 22, 2020 12:32 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Sent 50% on the 19th, standing by to send the rest. I'm pumped! |
|
| Author: | Rick Covalt [ Wed Apr 22, 2020 1:48 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Got your money and others Stan. I will post a list later. Thanks you everyone. Bolts just arrived today Off to the machinist
|
|
| Author: | captproblem [ Wed Apr 22, 2020 5:08 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Rick, if it’s not too late I’ll take one too. Let me know and I’ll send money ASAP. Thanks for your efforts. |
|
| Page 3 of 14 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|