Slant Six Forum
https://slantsix.org/forum/

T5 bellhousing update - 4/10/06
https://slantsix.org/forum/viewtopic.php?t=16996		 Page 4 of 4
Author:  RossKinder [ Thu Jun 29, 2006 7:07 pm ]
Post subject:  Whoever answers the questions . . .
Does the T5 come with several different bearing retainer diameters? If so, where can one find them listed?
Author:  vynn3 [ Fri Jun 30, 2006 11:34 am ]
Post subject: 
Hey Lou, FYI I received the bellhousing today. Looks great! For those considering getting in on the group buy last minute, I can tell you that the workmanship looks first-rate! I'm really pleased with how it came out.

Thanks again for all of your hard work on this, Lou. The check for the balance is in the mail!

Now if I could just figure out what I've bought... :) Kidding! Take your time on that article, Lou. I'd imagine I'm at least a year or so away from being able to afford the conversion, and the 8 1/4" rear-end swap I'll end up performing at the same time.

(Any sources for a flywheel cover?)

Thanks!!!!!!!!!!
VM
Author:  Thropar [ Fri Jun 30, 2006 3:25 pm ]
Post subject:  got it
Yes!...I got mine yesterday....thanks for the hard work in putting it together for us. The machine work is first rate, a very nice piece indeed! I need to order/send you the money for the spacer bushing....
Author:  RossKinder [ Fri Jun 30, 2006 3:52 pm ]
Post subject: 
Does the T5 come with several different bearing retainer diameters? If so, where can one find them listed?
Author:  Dart270 [ Fri Jun 30, 2006 7:07 pm ]
Post subject: 
4.91" bearing retainer for all T5s, as far as I have every seen.

Lou
Author:  RossKinder [ Fri Jun 30, 2006 11:05 pm ]
Post subject: 
Quote:
4.91" bearing retainer for all T5s, as far as I have every seen.

Lou
Thanks
Author:  Slant6Rat [ Mon Jul 03, 2006 6:33 pm ]
Post subject: 
Lou, I got my bellhousing back today. Very pleased with the work done.

Thanks for putting this purchase together. Well worth the wait. Don
ImageImage[/img]
Author:  NewLancerMan [ Mon Jul 03, 2006 8:38 pm ]
Post subject: 
Lou, Rob and I went hunting the yards this weekend and he said he'd be fine with shipping our bells together. Thanks again for doing all this!

MJ
Author:  Bohmer2 [ Thu Jul 06, 2006 1:54 pm ]
Post subject: 
My searching of this and the .com forum have failed me in determining what needs to be done to get an accurate reading for a speedometer mated to the T-5? Lou, Sandy what did you guys use for an adapter for the speedo cable to the tranny?

Also, the v-6 t-5 failed so I am getting a v-8 GT tranny so that is the adapter I will need for the crank.

Brian
Author:  Lars [ Thu Jul 06, 2006 5:10 pm ]
Post subject: 
Does the T-5 clear the T-bar crossmember? Or do you have to hack it up?
Author:  Dart270 [ Fri Jul 14, 2006 1:28 pm ]
Post subject: 
Lars - Hacking required, yes.

Bohmer2 - I had a custom speedo cable made (Keisler or speedo shop) with a T5 end and a 64 Dart speedo end. Any combo can be made. Will do on the ring.

Menko - Rob should already have his - sorry but I needed it gone due to moving from NC to VA. Wouldn't have saved more than $10 or so anyway.

Don - thanks for the pics!

Lou
Page 4 of 4 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/