Guess I'm at the wims of puplic then. Brain did say he had a piston the would work prefect with a 7 inch rod that they make already so thats an off the shelf part. But I think he wants to do a set up with out using a 2.2 piston as a base and give us a piston just for this application. Oh well I wait and see what is going to happen with everyone else changing rod sizes from this to that, but remember Tom makes the rods and Brain does the pistons so I think Tom is the key in finding out what rod we will get.
Well thats what Ive been tring to explain this whole time. A 7 inch rod for the street and something longer for racing, heck if my street motor works out well I may build a race motor. Then again if it is a toad well its small block time 
. But at lease we now have someone willing to build us bottom end parts for street and racing applications.
but at the same time I belive everyone here can profit from my undertaking in this. I do think, that if everyone agree's on the 7.005 or 7 or what ever we will make this get along faster. The stall in this project is that everyone, to coin my fraise, wants what they want. at times I wished I'd done it first and then told everyone. Everyones input is important though because we need to find the middle ground to take care of the largest group of builders. We'll see what happens I guess.