Here's one of Dave's valve cover Fopar has in his photobucket!
It clears his valve train in the wagon!
CJ
| Slant Six Forum https://slantsix.org/forum/ |
|
| Valve Cover Pics? https://slantsix.org/forum/viewtopic.php?t=40772 |
Page 4 of 4 |
| Author: | ceej [ Fri Nov 07, 2014 5:43 pm ] |
| Post subject: | |
Here's one of Dave's valve cover Fopar has in his photobucket! It clears his valve train in the wagon! CJ |
|
| Author: | Greg Ondayko [ Fri Nov 07, 2014 6:34 pm ] |
| Post subject: | |
Cj, What is the Valvetrain under there? Greg |
|
| Author: | ceej [ Fri Nov 07, 2014 8:28 pm ] |
| Post subject: | |
His Wagon was an OCG roller. Not sure about the specifics of the rockers. This was before the billet that we can get from OCG now. A surface hardened cam. He was getting somewhere just north of 50 runs out of a cam then. The billet cams OCG offers now should live a much longer life! There were clearance issues for that one IIRC. He built another for his Valiant, though I'm not sure it needed it for the same reasons. I will be looking into clearance with my corrected geometry billet roller cam and roller rocker system soon. I'm hoping to use the Offy cover once I've trued it up. The group buy item I have isn't true on the sealing surface. If it ends up too much trouble, I'll be warming up my TIG for a little exercise to build one myself. Got some Aluminum set aside, and been thinking about getting some purge fixtures together to get more exotic. Lot's of Titanium at our local scrap yard at the moment... CJ |
|
| Page 4 of 4 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|