Slant Six Forum
https://slantsix.org/forum/

OHC Slant Six
https://slantsix.org/forum/viewtopic.php?t=52767		 Page 4 of 5
Author:  Kidd [ Sun Jul 21, 2013 8:41 am ]
Post subject: 
This is awesome!!
And welcome to the forum!!!
Author:  ValiantBoyWonder [ Sun Jul 21, 2013 10:09 am ]
Post subject: 
what if he sold it back to MSU engineering department? then it'll be in something like a "museum". it would be inspiration to all the little slanters out there going to school
Author:  jimgrundy [ Sat Aug 03, 2013 12:42 pm ]
Post subject:  HyperPac Intake Manifold/Carb and Exhaust Manifolds
I have placed the intake manifold (P/N 2129898)/carb (P/N AO 2848S) and the exhaust manifolds (P/N 2129900 & 2129898) on e bay.
Author:  slantzilla [ Sun Aug 04, 2013 12:59 pm ]
Post subject: 
Good luck with the sale Mr. Grundy. :D
Author:  Rug_Trucker [ Mon Aug 05, 2013 6:16 am ]
Post subject: 
Is that a GM AFB? IIRC the Hyperpak used a 273 AFB. The fuel inlet looks like a Buick AFB I have.
Author:  Tom Drake [ Mon Aug 05, 2013 8:03 am ]
Post subject: 
Is the ebay ad correct - you will not ship, pick-up only?
Author:  Greg Ondayko [ Mon Aug 05, 2013 9:40 am ]
Post subject: 
I am a bit late to the discussion here,

But this is all neat.

Is there an item # for the Ebay sale? I couldnt seem to find it :-(


Thanks,

Greg
Author:  DusterIdiot [ Mon Aug 05, 2013 9:54 am ]
Post subject:  Here...
http://www.ebay.com/itm/Mopar-HYPERPAC- ... 1455845%26

and here

http://www.ebay.com/itm/Mopar-HYPERPAC- ... 1455845%26
Author:  hyper_pak [ Mon Aug 05, 2013 6:54 pm ]
Post subject: 
Quote:
Is that a GM AFB? IIRC the Hyperpak used a 273 AFB. The fuel inlet looks like a Buick AFB I have.
No it used a 3803 Carter. Long before the 273. They just list that carb as a easy replacement for the un-obtainamum original carb. Jim told me that the intake has a 2848S Carb on the intake.

Any guess on what the parts will go for? Anyone think the exhaust goes for more than the intake?
Author:  slantzilla [ Mon Aug 05, 2013 11:16 pm ]
Post subject: 
Jerry supposedly got $2400 for the set he had and they were not very good at all.

By that standard these should bring $3K easy, but the economy isn't what it used to.bo.
Author:  DadTruck [ Tue Aug 06, 2013 5:35 am ]
Post subject: 
Quote:
Jerry supposedly got $2400 for the set he had
I think that Jerry also drug those parts around to various swap meets for several years before he got that selling price,,

WV talked to Jerry more than I did,, but I remember him saying that if he did not get the price he wanted, the hyperpac manifolds will be buried with him...
Author:  Tom Drake [ Tue Aug 06, 2013 6:02 am ]
Post subject: 
What is questionable is that Jerry always said he got $2400 but I never heard anyone say they paid $2400 for them! LOL Those things were a wreck.

I would love to have a set but I am afraid they will always be priced out of my league.
Author:  Rug_Trucker [ Tue Aug 06, 2013 7:13 am ]
Post subject: 
OK did some research. That carb is from a 1960 PD4 383. It was the RB with the 3.75" stroke. Rare carb.
Author:  slantzilla [ Tue Aug 06, 2013 8:08 am ]
Post subject: 
Quote:
Quote:
Jerry supposedly got $2400 for the set he had
I think that Jerry also drug those parts around to various swap meets for several years before he got that selling price,,

WV talked to Jerry more than I did,, but I remember him saying that if he did not get the price he wanted, the hyperpac manifolds will be buried with him...
I looked at them a few times. They had been painted to cover up a lot of welding on both intake and exhaust pieces. If he got $2400 P. T. Barnum was right. There's a sucker born every minute. :lol:
Author:  wvenable [ Tue Aug 06, 2013 6:56 pm ]
Post subject: 
Jerry's middle name is P. T.
Page 4 of 5 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/