I just got off the phone with Marshall Campbell. He is going to put me in direct contact with someone from Wiseco so I can put together a group buy. More to follow shortly.

_________________
Rob

I’m Mater
The Kentucky Poser

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)

I talked directly to the Wiseco representative. The kits will be $600-$650 each. There will be about an 8 to 10 week turnaround time once we submit an order. Please post here if you are seriously interested in a set and are willing to put down half upfront.

_________________
Rob

I’m Mater
The Kentucky Poser

As long as it is for a 3.504" set. Thanks Rob

Rick = 1 set

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I will take one set. for Ø3.504" for use with 7.001" rods.

Any info on whether this part # will be available again in the future, or should I stock up now with 2or more sets?


Thank you, Greg

_________________
http://www.youtube.com/hyperpack

I gave him a rough estimate of interest at about four sets of each size. He said they could re-institute the old part numbers in order to make another run. The price to do just one set in the future will likely be higher…

Starting a Roll Call:

Rick Covalt - 3.504” x 1
Greg Ondayko - 3.504” x 1
Wayne Venable - 3.485” x 1
Terry Littlejohn -
Lou Madsen - 3.485” x 1
Brad -
Matt -
CJ -

_________________
Rob

I’m Mater
The Kentucky Poser

What all sizes are they doing Rob?

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Thanks, Rob. I have a set of 3.504" I still haven't used from the very first group buy, so I will ask for 3.465" bore. If they don't have enough at that size, I would request 3.485" bore.

Cheers,
Lou

_________________
Home of Slant6-powered fun machines since 1988

I would think the part numbers and the CAD / CAM Solid Model Files should still be on servers or drives somewhere at Wiseco.

Greg

_________________
http://www.youtube.com/hyperpack

I think the smaller bore 3.465” pistons are still available. That’s what Steven ordered last year.

This group buy is for the 3.485 and 3.504 pistons.
I will ask about the 3.465 though.

They have the files to re-create the big bore pistons. That makes this faster and easier.

_________________
Rob

I’m Mater
The Kentucky Poser

Thanks Rob! The 3.485 is a nice size! That is what is in my race engine now. But that allows someone with a .060 block to go just a little bigger. So I will need the 3.504 bore! If they were available at the same price I may even have gone to .130 over since my block was sonically tested. But probably not worth any additional risk with my car headed for more street driving.

Let me know where you want the money sent and when! Thanks

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Mater - put me down for a set of 3.485. Still thinking about the 3.504. Will let you know before all of this is final. Thanks!

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)

I’ve PM’d anyone that posted in this thread to confirm whether or not you want a set. I’ll give it a few days before I move forward.

_________________
Rob

I’m Mater
The Kentucky Poser

Thanks Mr. Mater!

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)