Slant Six Forum
https://slantsix.org/forum/

South African Slant Six Manifolds
https://slantsix.org/forum/viewtopic.php?t=31276		 Page 5 of 7
Author:  slantEdgar [ Wed Nov 19, 2008 9:02 am ]
Post subject: 
yeah, i know those are the intakes being discussed in this thread. i was just curious why there was no mention on this thread about the ebay listing.
i wonder why i thought the seller was from australia :roll:
maybe i was looking at those aussie intakes at the same time and my mind couldn't take the intake overload and caused my thoughts to go into a hurricane of manifold fantasies :D

btw Dan, i did see Other Thread and enjoyed the loop. i think i'll take another spin
Author:  68barracuda [ Wed Nov 19, 2008 10:58 am ]
Post subject: 
Hey hey - Australia indeed :shock:

BTW I did mention that it was on ebay.... :? Why?... Why not? Had a lot of queries afterwards and to recoop the funds I put into this I need to sell manifolds!!

Business is business after all

I f you want one PM me with your details

later

BTW - an ARSEHOLE dropped the precious first metal pattern..and it warped and cracked . which wouldn't have been so bad if another EYE - DEE - TEN -TEE didn't clean the molding clay of the modified manifold...

OK Before Monday I need to reapply the injector bosses and the Plenum heating (*&^^%%$#@@!!!!!!!!!!!!!!!!!!
Author:  SlantSixDan [ Wed Nov 19, 2008 5:08 pm ]
Post subject: 
D'OH!!! :shock:
Author:  Dizzydean [ Thu Nov 27, 2008 1:11 pm ]
Post subject:  Price
Hi Fanie,can you possibly give me a price for the long runner 2x2 with whatever linkage it needs and with or wothout air cleaners. Thanks for opening the option doors. Dean[/i]
Author:  68barracuda [ Sat Nov 29, 2008 12:46 am ]
Post subject: 
Wildo dean - please supply shipping details - carbs or not etc.

Gents due to the arsehead stuffing up my pattern - casting time has been moved to January I do apologize to all interested parties - due to the extra time now available I made an extra change - I removed the number six cylinder vacuum port and moved it onto the balancing tube tween the plenums 3 ports located there - one for christmastree - ac etc, one for pcv, one for vacuum brakes.

Talk to you later

Fanie
Author:  Jester [ Fri May 29, 2009 1:12 am ]
Post subject: 
What ever happened to the plans for these manifolds? :?:
Author:  68barracuda [ Fri May 29, 2009 2:03 am ]
Post subject: 
They are still in the running - private guy here not ozzie speed :) economic downturn made quite a few guys cancel - I had to find a foundry who are prepared to work at the same price, but in smaller batches

Will keep you updated
Author:  Jester [ Fri May 29, 2009 10:43 am ]
Post subject: 
ok, cuz I forgot what I pre-ordered :lol:

Thanks for the update!
Author:  68barracuda [ Fri May 29, 2009 11:25 am ]
Post subject: 
Had to sort my bond before continuing with this project :?
Author:  Dizzydean [ Fri May 29, 2009 9:07 pm ]
Post subject: 
Just wanted to let you know Im still in :bow:
Author:  68barracuda [ Fri May 29, 2009 11:53 pm ]
Post subject: 
Good to know :D
Author:  Jester [ Sat May 30, 2009 12:44 am ]
Post subject: 
I'm still in... what was it again? 8)
Author:  Charrlie_S [ Sat May 30, 2009 5:31 am ]
Post subject: 
I should still be in, but with the exchange rates changing so often, that could be a factor. Let me know when you get close, and can determine pricing, I will not hold you to the old quoted price. Too many factors have changed.
Author:  stonethk [ Sat May 30, 2009 6:19 am ]
Post subject: 
Ditto on what Charrlie_S said.
Author:  68barracuda [ Sat May 30, 2009 12:27 pm ]
Post subject: 
Thx guys much appreciated :)
Page 5 of 7 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/