Is that a plane...?
No its , its a slant 6 Valiant...
Its hard to find words after a test ride at higher speeds.
Awesome
Holy cow , from lowest speeds to
its pulling like a train on steroidsAnd just 7.3 psi so far
More to come
Thomas
| Slant Six Forum https://slantsix.org/forum/ |
|
| Slant 6 turbo project https://slantsix.org/forum/viewtopic.php?t=54579 |
Page 5 of 10 |
| Author: | dwrlhcaz [ Thu Aug 07, 2014 7:01 pm ] |
| Post subject: | |
Beautiful work thomas. |
|
| Author: | Thomas S [ Sun Aug 10, 2014 8:40 am ] |
| Post subject: | |
Thanks dwrlhcaz I continue to make everything work properly, so i can let the tuning company take care of it. Thomas |
|
| Author: | Al T [ Tue Aug 12, 2014 2:31 pm ] |
| Post subject: | Good shot of the spray! |
I like it. Always good to see what the injector is actually doing |
|
| Author: | Kidd [ Wed Aug 13, 2014 9:21 pm ] |
| Post subject: | |
Thats awesome!! I am really think of a turbo on my wifes 64.....Your work is so clean. All the electrical might drive me crazy though.LOL Hope she is running well soon! |
|
| Author: | Thomas S [ Fri Aug 15, 2014 1:32 am ] |
| Post subject: | |
She is running quite good now, but the idle sounds strange . If i rise the rpm she sounds very good .. A tight dark soft voice... AFR is 10. something so the idle problem its understandable . Thomas |
|
| Author: | turbo66valiant [ Wed Aug 20, 2014 10:16 am ] |
| Post subject: | |
Good looking job so far!! I also dig the sleeper look. I can see EFI in my 66's future. Later Ryan |
|
| Author: | billdedman [ Wed Aug 20, 2014 10:18 pm ] |
| Post subject: | No efi for me... |
[quote="turbo66valiant"]Good looking job so far!! I also dig the sleeper look. I can see EFI in my 66's future. Later Ryan[/quote Ryan, would you consider selling me that carburetor? I am dead serious... Bill |
|
| Author: | Thomas S [ Thu Aug 21, 2014 5:48 am ] |
| Post subject: | Re: No efi for me... |
Quote: Quote: Good looking job so far!! I also dig the sleeper look. I can see EFI in my 66's future. Later Ryan[/quote Thanks Ryan Its driveable now , have done some testrun and it will be a very fun streetcar when tuned properly My wastegate start open at 0.7 , so i have ordered a set of springs for it I must tell you, im in your fanclub or your cars fanclub.. I have watched your videos many times and its still very.... smileable Thomas Ryan, would you consider selling me that carburetor? I am dead serious... Bill |
|
| Author: | turbo66valiant [ Thu Aug 21, 2014 5:53 pm ] |
| Post subject: | |
Bill, No sale on the carb until I get all the parts to efi. You're going fuelie anyways, right? Thomas, Wish my hotrod didn't have a hood scoop. One of my goals is 9.99 sec on a stock looking plain jane Valiant. Good luck!! Ryan |
|
| Author: | billdedman [ Thu Aug 21, 2014 9:18 pm ] |
| Post subject: | |
Bill, No sale on the carb until I get all the parts to efi. You're going fuelie anyways, right? Ryan Ryan, I have no plans to ever go EFI. My car is strip-ready except for mixture issues. (too lean under boost) In the coming wweeks, I will be buying a trailer and can take it to the strip for some shakedown runs at 10 pounds of boost... 13s probably. I can't wait... When you decide to sell that carburetor, let me know... I want it (bad!) |
|
| Author: | Thomas S [ Wed Aug 27, 2014 1:32 pm ] |
| Post subject: | |
Is that a plane...? No its , its a slant 6 Valiant... Its hard to find words after a test ride at higher speeds. Awesome Holy cow , from lowest speeds to its pulling like a train on steroidsAnd just 7.3 psi so far More to come Thomas |
|
| Author: | billdedman [ Wed Aug 27, 2014 2:55 pm ] |
| Post subject: | |
Quote: Is that a plane...?
No its , its a slant 6 Valiant... Its hard to find words after a test ride at higher speeds. Awesome Holy cow , from lowest speeds to its pulling like a train on steroidsAnd just 7.3 psi so far More to come Thomas ..................................................  ...............................................
|
|
| Author: | Thomas S [ Sun Sep 07, 2014 11:13 am ] |
| Post subject: | |
I was at a dyno session ... The result was 323 hp at 5ooo rpm and about 400 ftlb torque. And it was done on a Dynapack As you can see it was still climbing but i decide to stop by 5000 rpm The boost was 14.4 psi The power is rising quite fast.... [/img]  [/url]
|
|
| Author: | billdedman [ Sun Sep 07, 2014 12:42 pm ] |
| Post subject: | 323 hp... great!!! |
Quote: I was at a dyno session ...
Wow, Thomas; that's really impressive!The result was 323 hp at 5ooo rpm and about 400 ftlb torque. And it was done on a Dynapack As you can see it was still climbing but i decide to stop by 5000 rpm The boost was 14.4 psi The power is rising quite fast.... [/img] [/url]Thanks so MUCH for posting this! I'm anxious to see what kind of power it might make at 20 pounds; any inclination to try that in the future? Bill |
|
| Author: | Dart270 [ Sun Sep 07, 2014 3:25 pm ] |
| Post subject: | |
Very nice, Thomas. Thanks for the data posting. Enjoy! Lou |
|
| Page 5 of 10 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|