| Slant Six Forum https://slantsix.org/forum/ |
|
| 220,000 lb Arp head studs https://slantsix.org/forum/viewtopic.php?t=56957 |
Page 5 of 10 |
| Author: | moparfrank [ Wed Mar 04, 2015 7:48 pm ] |
| Post subject: | |
I'll order 3 sets tomorrow. |
|
| Author: | AndyZ [ Thu Mar 05, 2015 10:27 am ] |
| Post subject: | |
I am in. |
|
| Author: | Landons65Dart [ Thu Mar 05, 2015 5:14 pm ] |
| Post subject: | |
I'm in. I'll definitely need a good set of ARP studs for my build |
|
| Author: | moparfrank [ Thu Mar 05, 2015 8:15 pm ] |
| Post subject: | |
Ok, I'll call tomorrow and change the order. I'll get the 6 sets to lower the cost. |
|
| Author: | 1974duster kev [ Thu Mar 05, 2015 10:04 pm ] |
| Post subject: | |
What kind of time does arp say the sets will take to arrive? Kev |
|
| Author: | Dart270 [ Fri Mar 06, 2015 5:43 am ] |
| Post subject: | |
OK, I am having a moment of weakness, and will go in to buy the 6th set. Thanks for organizing! Let us know how we can pay and what is the timing. Best wishes, Lou |
|
| Author: | Landons65Dart [ Fri Mar 06, 2015 7:12 am ] |
| Post subject: | |
Yes, thank you very much! This will help tremendously. As soon as you're ready I'll be happy to pay my portion. Since we're talking about studs, what have you guys done with the main caps? Did you stud the mains or just stuck with bolts? |
|
| Author: | 1974duster kev [ Fri Mar 06, 2015 8:53 am ] |
| Post subject: | |
My motor is arp studded mains, arp rod bolts, the current 180000 arp head studs. Yes! just lemme know how much I owe and when I can expect them so I can figure out when I wanna yank my engine out lol Kev |
|
| Author: | Landons65Dart [ Fri Mar 06, 2015 9:56 am ] |
| Post subject: | |
How did you procure the bottom end arp studs? Are there part numbers for the rod bolts and end cap studs? Did you run stock caps? |
|
| Author: | 1974duster kev [ Fri Mar 06, 2015 12:19 pm ] |
| Post subject: | |
I have the k1 connecting rods with the weisco pistons they came with the arp rod bolts and I just ordered the mains from summit or arp I can't remeber they should be just an off the shelf part if I recall nothing custom like these 220,000 head studs. Just FYI if you have arp rod bolts put in you must have the rods resized because changing the rod bolts will distort the rod just in case to let ya know. Kev |
|
| Author: | Dart270 [ Fri Mar 06, 2015 12:46 pm ] |
| Post subject: | |
Plenty of companies online carry the main stud kits. I believe Campbellenterprises has them? Lou |
|
| Author: | CNC-Dude [ Fri Mar 06, 2015 12:50 pm ] |
| Post subject: | |
Quote: How did you procure the bottom end arp studs? Are there part numbers for the rod bolts and end cap studs? Did you run stock caps?
Aftermarket billet main caps with studs.
|
|
| Author: | Landons65Dart [ Fri Mar 06, 2015 3:08 pm ] |
| Post subject: | |
Are the mains custom? What did you pay for them? I'm wanting to take all precautions with my build and I don't want to take any shortcuts. |
|
| Author: | AndyZ [ Fri Mar 06, 2015 6:35 pm ] |
| Post subject: | |
I am in. |
|
| Author: | moparfrank [ Fri Mar 06, 2015 7:20 pm ] |
| Post subject: | |
I changed the order today. We won't have to wait for the new pricing now because we are ordering the six sets. They have my credit card number to start the process. They will be sending me the confirmation dimensions on Monday. Alex said he would expedite the order because we had to wait so long for the pricing. The nuts will be 12pt unless you want 6pt so let me know if you want 6pt. If all of you ordering sets would pm me your e-mail I will send you my address and you can send me a check once I have the cost. If anyone still wants in I can up the order until I sign the confirmation. |
|
| Page 5 of 10 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|