Slant Six Forum
https://slantsix.org/forum/

Windage Trays - Interest
https://slantsix.org/forum/viewtopic.php?t=64691		 Page 5 of 14
Author:  Rick Covalt [ Fri May 15, 2020 8:58 am ]
Post subject:  Re: Windage Trays - Interest
Got it Rob!
Author:  Rick Covalt [ Sat May 16, 2020 9:48 am ]
Post subject:  Re: Windage Trays - Interest
First batch of trays / scrapers are ready to ship and they will go out Monday. I'll let everyone know what their final shipping costs are. Bolts and studs were cleaned and the studs are already lock tighted into place. All fasteners are Grade 8 except for the temporary nuts. I did have the machine shop tap them in fine thread since that was easier to do and it is stronger. Trays were sprayed down with brake clean and blowed off, but they were not coated with anything. If you plan to not use them for along time I'd spray them down with something.

Thanks to all.
Rick
Going out Monday

Wayne Venable
Reed Spier
Rueben Chevere
Dominic Rydners

Attachment:
IMG_1610.JPG
IMG_1610.JPG [ 63.31 KiB | Viewed 6416 times ]
Author:  Rick Covalt [ Sat May 16, 2020 11:38 am ]
Post subject:  Re: Windage Trays - Interest
Stan , I need your Address
Thanks, Rick
Author:  Reed [ Sat May 16, 2020 4:57 pm ]
Post subject:  Re: Windage Trays - Interest
Quote:
First batch of trays / scrapers are ready to ship and they will go out Monday.
Going out are Monday

Reed Spier
Image

THANKS RICK!
Author:  Rick Covalt [ Sat May 16, 2020 5:37 pm ]
Post subject:  Re: Windage Trays - Interest
Also going out Monday are Stan's and Neil's :D
Author:  Rick Covalt [ Sun May 17, 2020 3:21 pm ]
Post subject:  Re: Windage Trays - Interest
You first folks getting these trays please check for the tray and a ziplock bag that has the new bolts, studs and washers in it. Then, because some dumb dumb (Me) forgot the 4 hardened washers that go under the new main bolts, I had to cut the end of the box and slide in a 2nd ziplock bag with the 4 hardened washers in it. You must have these washers installed under each main bolt. One of you will have 4 extras because I actually did put them in the first one I packaged. No, I could not remember who it was so I put them in all of them! This old age stuff is getting old! :D :D
Author:  Rob Simmons [ Mon May 18, 2020 6:08 am ]
Post subject:  Re: Windage Trays - Interest
Yeah,... CRS hits us all... Some younger than others... :lol:
Author:  desertnomad [ Wed May 20, 2020 7:32 am ]
Post subject:  Re: Windage Trays - Interest
Hello I Would take a tray and scraper for sure if still available.
Best George
Author:  Rick Covalt [ Wed May 20, 2020 9:08 am ]
Post subject:  Re: Windage Trays - Interest
Desert, I'll give it a couple more days for those who had already told me they wanted a Tray to chime in. If they do not by Friday I give you one of those.

Rick
Author:  Rick Covalt [ Wed May 20, 2020 9:11 am ]
Post subject:  Re: Windage Trays - Interest
Matt Deemer, Yours went out today.
Author:  Reed [ Wed May 20, 2020 1:15 pm ]
Post subject:  Re: Windage Trays - Interest
I got confirmation mine was shipped. Thanks Rick!
Author:  Rick Covalt [ Wed May 20, 2020 3:18 pm ]
Post subject:  Re: Windage Trays - Interest
To All,
I had them all packaged, labeled and ready for the shipper to pick up on Monday morning. We have a direct number to our shipper and we text them and they come within a couple hours and pick up our packages. But for some unknown reason they did not get our messages Monday or Tuesday morning! :? Anyway they were all picked up this morning and are on the way. We actually had about 20-25 packages that were waiting for pick up! Sorry for the delay.

Rick
Author:  Reed [ Wed May 20, 2020 5:20 pm ]
Post subject:  Re: Windage Trays - Interest
I find a two day delay in the shipping of a custom made piece for my engine that has been out of production for 30 years to be absolutely unacceptable! :lol:

Seriously, two days is no big deal. Thanks for even putting this deal together!
Author:  neilskiw [ Wed May 20, 2020 7:14 pm ]
Post subject:  Re: Windage Trays - Interest
Quote:
I find a two day delay in the shipping of a custom made piece for my engine that has been out of production for 30 years to be absolutely unacceptable! :lol:

Seriously, two days is no big deal. Thanks for even putting this deal together!

Yeah.... What he said! No hurry here.
Author:  vitamindart [ Thu May 21, 2020 6:09 am ]
Post subject:  Re: Windage Trays - Interest
Quote:
I find a two day delay in the shipping of a custom made piece for my engine that has been out of production for 30 years to be absolutely unacceptable! :lol:

Seriously, two days is no big deal. Thanks for even putting this deal together!
I agree, Thanks Again for putting this together!
Page 5 of 14 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/