Slant Six Forum
https://slantsix.org/forum/

"Sir Lancerlot" 61 Lancer Gasser project
https://slantsix.org/forum/viewtopic.php?t=65225		 Page 5 of 6
Author:  Rob Simmons [ Wed Oct 07, 2020 4:39 pm ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
Thanks! I’ll do that! Working on the Duster right now... :lol:
Author:  Rob Simmons [ Thu Oct 08, 2020 10:31 am ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
I dun it! Thanks Dick! :mrgreen:
Author:  Rob Simmons [ Thu Oct 08, 2020 3:40 pm ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
I went out to Renegade Race Cars this evening. Craig and I pondered the surgery on them front fenders... He’s gonna run some numbers and get back with me.
Author:  Old6rodder [ Fri Oct 09, 2020 10:31 am ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
Not too shabby. Bottom of the page. 8)
Author:  Rob Simmons [ Fri Oct 09, 2020 12:14 pm ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
Oh yeah!!

Attachments:
86BBF746-CA2B-4D3D-A1F7-F0AF6E5D4E28.jpeg
86BBF746-CA2B-4D3D-A1F7-F0AF6E5D4E28.jpeg [ 38.78 KiB | Viewed 4833 times ]
Author:  sixinthehead [ Fri Oct 09, 2020 9:02 pm ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
Now THAT is worthy!
Author:  Old6rodder [ Mon Nov 09, 2020 11:29 am ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
Not as pretty, but lots of the early FXers didn't even bother to move the front wells forward, just cut the front up to suit.
Allowed a bit of extra room for headers.
And no, there aren't only six stacks in the photo. The left rear pair're hiding behind the right front ones. Bashful, no doubt. :lol:

Image
Author:  Rob Simmons [ Mon Nov 09, 2020 12:14 pm ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
That’s cool! 8)

The price tag to move the rear axle up is too much for me, so we are just going to nudge the front up a little for now. He shortened the front axle this morning and should have it rolling and ready for pick up this week.

Attachments:
4FC7C1BB-6326-41E3-9871-A10B67E0D121.jpeg
4FC7C1BB-6326-41E3-9871-A10B67E0D121.jpeg [ 95.77 KiB | Viewed 4742 times ]
5541F4A5-59E4-4687-9718-2ACE283C4EFC.jpeg
5541F4A5-59E4-4687-9718-2ACE283C4EFC.jpeg [ 119.49 KiB | Viewed 4743 times ]
Author:  Rob Simmons [ Fri Nov 13, 2020 8:46 am ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
Axle is in. Just needs to finish the Vega steering box mounting and replace the original lower radiator support that is rusted.

Then it’ll come home for me to take a few years getting some kind of drivetrain installed...

Attachments:
BD6ECFF0-E434-47FF-81B5-87D685666FF0.jpeg
BD6ECFF0-E434-47FF-81B5-87D685666FF0.jpeg [ 117.68 KiB | Viewed 4675 times ]
4B6CB26E-6A9D-4A66-8856-EF3198B9D796.jpeg
4B6CB26E-6A9D-4A66-8856-EF3198B9D796.jpeg [ 116.11 KiB | Viewed 4675 times ]
Author:  Rob Simmons [ Wed Nov 18, 2020 6:55 am ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
Steering box and lower radiator support are done. Just needs to finish the drag link for the steering.

Then it’s back home for the drivetrain installation fabrication modification frustration... :lol:

Attachments:
16D8BB9C-6519-4875-9250-CE878467B299.jpeg
16D8BB9C-6519-4875-9250-CE878467B299.jpeg [ 95.41 KiB | Viewed 4613 times ]
Author:  Badvert65 [ Wed Nov 18, 2020 10:55 am ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
The leaf spring won't hit the steering box?
Author:  Rob Simmons [ Wed Nov 18, 2020 11:14 am ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
It’s probably further away than it appears from this angle.

Now,... when I put that big block in there it may get close... :twisted: :twisted:
Author:  Rick Covalt [ Wed Nov 18, 2020 1:28 pm ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
Quote:
Now,... when I put that big block in there it may get close
:( :( Say it ain't so!!
Author:  Rob Simmons [ Wed Nov 18, 2020 2:58 pm ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
I've got options... :twisted:

But no.... It will probably be Slant 6 powered... :wink:
Author:  Rob Simmons [ Wed Dec 02, 2020 6:33 am ]
Post subject:  Re: "Sir Lancerlot" 61 Lancer Gasser project
I picked up the Lancer yesterday. Got me another project for retirement or estate sale, whichever...

Attachments:
0ACC18B0-C867-4CA3-B141-27EA33C3BC0E.jpeg
0ACC18B0-C867-4CA3-B141-27EA33C3BC0E.jpeg [ 136.34 KiB | Viewed 4531 times ]
2C40AEEC-B09D-40DB-B516-533F8D37A2DB.jpeg
2C40AEEC-B09D-40DB-B516-533F8D37A2DB.jpeg [ 106.71 KiB | Viewed 4531 times ]
157008C4-ADD2-454F-A2B5-52C285D99FAC.jpeg
157008C4-ADD2-454F-A2B5-52C285D99FAC.jpeg [ 80.21 KiB | Viewed 4531 times ]
AC1B6BF5-B274-42EA-8CA6-7D54555E91CF.jpeg
AC1B6BF5-B274-42EA-8CA6-7D54555E91CF.jpeg [ 90.85 KiB | Viewed 4531 times ]
D1C94705-3978-43FE-9A45-7C5A9EB0F487.jpeg
D1C94705-3978-43FE-9A45-7C5A9EB0F487.jpeg [ 76.48 KiB | Viewed 4531 times ]
951BEEF4-9A47-410E-947F-1E4418DD362D.jpeg
951BEEF4-9A47-410E-947F-1E4418DD362D.jpeg [ 98.59 KiB | Viewed 4531 times ]
9164C5CF-271A-4C0D-850E-7FEDDC8A41A2.jpeg
9164C5CF-271A-4C0D-850E-7FEDDC8A41A2.jpeg [ 85.23 KiB | Viewed 4531 times ]
F127397A-121D-4628-B01D-E831F85585E5.jpeg
F127397A-121D-4628-B01D-E831F85585E5.jpeg [ 76.8 KiB | Viewed 4531 times ]
Page 5 of 6 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/