I will be ordering 2 next weekend!!! I cant wait!!
Bill
Btw, thanks Cecil!
| Slant Six Forum https://slantsix.org/forum/ |
|
| Erson Cam Group Buy https://slantsix.org/forum/viewtopic.php?t=21400 |
Page 6 of 20 |
| Author: | NewLancerMan [ Fri Feb 02, 2007 4:59 pm ] |
| Post subject: | |
Cecil, you're quite welcome, I'm glad its turning out well. I'd like to pick your brain on my cam choice when you have time MJ |
|
| Author: | HyperValiant [ Sat Feb 03, 2007 11:21 am ] |
| Post subject: | |
I sent my money to Erson Friday.They will take money orders. $176.06 FOR CAM/LIFTERS/SHIPPING.I paid over $200 4 years ago for my Comp 264 and lifters from PAW. Thanks again Menko. HyperValiant |
|
| Author: | 66aCUDA [ Sun Feb 04, 2007 7:19 am ] |
| Post subject: | |
Ordered My 2 cams Friday. Tom is a hoot to deal with. Thanks New Lancer Man. Frank |
|
| Author: | mrbillohnooo [ Sun Feb 04, 2007 1:50 pm ] |
| Post subject: | |
I will be ordering 2 next weekend!!! I cant wait!! Bill Btw, thanks Cecil! |
|
| Author: | NewLancerMan [ Mon Feb 05, 2007 10:27 pm ] |
| Post subject: | |
Just wanted to update everyone--over 20 cams have been ordered, so make sure you get your order in if this is something you want. You do not need to pay until the cam is shipped, which will be several weeks from now since they needed to order more blanks due to overwhelming demand. I'm glad this worked out so well for everyone. MJ |
|
| Author: | Mister Twister [ Tue Feb 06, 2007 4:36 am ] |
| Post subject: | |
edit |
|
| Author: | NewLancerMan [ Tue Feb 06, 2007 5:09 pm ] |
| Post subject: | |
yes Tom will set you up with matching springs for whatever grind you want to use. Order information here |
|
| Author: | Charrlie_S [ Tue Feb 06, 2007 6:40 pm ] |
| Post subject: | |
Mine is on order. Discussed the usage with Tom, and went with his recomendation. They are pleasantly surprised with the response. |
|
| Author: | Doc [ Fri Feb 09, 2007 8:26 am ] |
| Post subject: | Order Information.... |
Quote: How to Order:
Pulled this forward, it was getting hard to find.---------------- 1. Call Tom McGibbon 1 (800)-641-7920 ext. 327 YOU MUST MENTION SLANTSIX.ORG TO GET PRICING, and feel free to mention my name (Menko Johnson). 2. Have your VISA/MC Ready 3. Shipping Information Orders will be filled on first come, first served basis, and nobody will be charged until the camshafts have been shipped. I thought this would be easier than me trying to get everyone's information and handling it (S-P-A-X). DD |
|
| Author: | dakight [ Fri Feb 09, 2007 10:12 am ] |
| Post subject: | |
I ordered a 270 this morning. Turns out Tom is a slanter too. He told me that he runs a 270 with a 4 bbl, 2200 stall converter in his wife's car. Nice guy. |
|
| Author: | NewLancerMan [ Fri Feb 09, 2007 2:56 pm ] |
| Post subject: | |
yep, that's why I was able to get them so solidly behind us on this deal I'm glad its working out for everyone, they are pleasantly surprised by the large response. MJ |
|
| Author: | Doc [ Fri Feb 09, 2007 3:08 pm ] |
| Post subject: | |
Tom and I spoke for a while about developing a "better 244" type cam. This would be a mild grind for a stock to near stock SL6 that is "intake limited". I need to send him some stuff so we can take a look at some possible profile combos. It is looking like it will be a "reverse dual pattern" cam (more aggressive on the intake side) and ground on a wide lobe center. DD |
|
| Author: | gearhead [ Sun Feb 11, 2007 7:17 pm ] |
| Post subject: | |
Hello: I only just got back to Oregon again from having gone back to North Carolina. I saw this thread and thought I better finish something I've been working on for a year or so. Please look for a new thread on cams posted by me, I think it might have an impact on some of your desicions. Gearhead AKA Karl Boe |
|
| Author: | NewLancerMan [ Sun Feb 11, 2007 7:33 pm ] |
| Post subject: | |
hurry karl hurry! you were just the guy I wanted to talk to about this. Course I just placed my order for a 280in/270ex setup. But there's always time  I have to do some overlap calculations tonight to finalize the lobe centerMJ |
|
| Author: | 60 Pioneer [ Tue Feb 13, 2007 12:24 pm ] |
| Post subject: | Thanks! |
Thanks for setting this up MJ. I put my order in yesterday for a cam, lifters, springs, and retainers. Tom was great to deal with; answered all my questions, asked a few of his own about my car, and we agreed on a 266int/254ex pattern with his recommendation of 110lsa. Can't wait to get it together and fire it up. |
|
| Page 6 of 20 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|