Totally unacceptable!
You can just keep everything I ordered then!
Until we meet again...
| Slant Six Forum https://slantsix.org/forum/ |
|
| Windage Trays - Interest https://slantsix.org/forum/viewtopic.php?t=64691 |
Page 6 of 14 |
| Author: | Rob Simmons [ Thu May 21, 2020 6:46 am ] |
| Post subject: | Re: Windage Trays - Interest |
Totally unacceptable! You can just keep everything I ordered then! Until we meet again...
|
|
| Author: | Rick Covalt [ Thu May 21, 2020 1:36 pm ] |
| Post subject: | Re: Windage Trays - Interest |
This is a pretty tough crowd!  Just so everyone knows, I am never doing 20 of these again. May do groups of 5 or 6, but not 20. |
|
| Author: | Reed [ Thu May 21, 2020 2:31 pm ] |
| Post subject: | Re: Windage Trays - Interest |
I once did a batch of custom t-shirts for slantsix.com I was amazed how much time it ate up. A batch of 20 windage trays (and crank scrapers on top of that) is a serious time commitment for someone not doing it as their job. Thanks a million for seeing this through! |
|
| Author: | Badvert65 [ Thu May 21, 2020 5:14 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Tray arrived today. Looks absolutely awesome. Thanks so much for doing this. -Matt |
|
| Author: | Rick Covalt [ Sat May 23, 2020 4:53 am ] |
| Post subject: | Re: Windage Trays - Interest |
Ok I got payments on 2 more, so I have just one not spoken for. |
|
| Author: | B Body Bill [ Sat May 23, 2020 6:28 am ] |
| Post subject: | Re: Windage Trays - Interest |
I'm a little late to the table and it's been a while since I've been in here but I'll take 2 trays and 2 scrapers if it's still possible. Still working on my two slants and their coming along nicely. My son is now scouring the boards going through the wealth of information from this group. Thank you for sharing your knowledge and experience this, all of you! |
|
| Author: | Rick Covalt [ Sat May 23, 2020 4:08 pm ] |
| Post subject: | Re: Windage Trays - Interest |
B BodyBill and everyone, I'm sorry but all the trays are spoken for. |
|
| Author: | hyper_pak [ Wed May 27, 2020 9:55 am ] |
| Post subject: | Re: Windage Trays - Interest |
Rick, got mine last night, it was on the front step. I found it when I was going to bed, I will open the box tonight. |
|
| Author: | hyper_pak [ Wed May 27, 2020 5:16 pm ] |
| Post subject: | Re: Windage Trays - Interest |
All good, no extra washers. |
|
| Author: | captproblem [ Thu May 28, 2020 4:01 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Found a nice present leaning on my garage door this morning! Everything looks awesome!! Hope to get it in By July, after knee surgery pain subsides. Thanks again- Gary |
|
| Author: | Reed [ Thu May 28, 2020 4:10 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Mine just arrived! Yay! No extra washers, but a great product! Thanks again! |
|
| Author: | Rick Covalt [ Thu May 28, 2020 5:25 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Glad they all arrived. As I think I mentioned I would definitely wipe them down with something to protect them from surface rust. I know my air compressor was strained pretty hard and with all the grinding and I am sure when I blowed them off there could have been a little moisture that got on them. The last few I did I sprayed down with silicone and wiped them off. |
|
| Author: | Greg Ondayko [ Tue Jul 14, 2020 4:04 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Is there a way this thread can be set so it does not delete when it gets "old" It seems that the for sale section gets cleaned out after a while. Greg |
|
| Author: | GOONCHANNEL [ Thu Sep 03, 2020 6:34 pm ] |
| Post subject: | Re: Windage Trays - Interest |
I'd like on too please. |
|
| Author: | dakight [ Fri Oct 02, 2020 4:04 am ] |
| Post subject: | Re: Windage Trays - Interest |
I know this is an old thread and I'm a "Johnny come Lately" on it but I would be interested in a set next time there's an order. |
|
| Page 6 of 14 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|