Me too!
| Slant Six Forum https://slantsix.org/forum/ |
|
| Windage Trays - Interest https://slantsix.org/forum/viewtopic.php?t=64691 |
Page 7 of 14 |
| Author: | robertob [ Fri Oct 02, 2020 8:00 am ] |
| Post subject: | Re: Windage Trays - Interest |
same here - I haven't been on here for a while and when I do I see all kinds of cool stuff being made! Put me down for one next time. |
|
| Author: | Rick Covalt [ Sat Oct 03, 2020 10:55 am ] |
| Post subject: | Re: Windage Trays - Interest |
Well, no promises but I may do a few over the winter. I have enough bolts to do 5 more I think. After that it would be another run of bolts through the machine shop. |
|
| Author: | Greg Ondayko [ Sun Oct 04, 2020 7:39 am ] |
| Post subject: | Re: Windage Trays - Interest |
Rick, put me down for one if you do a winter run. Thank you, Greg |
|
| Author: | RedlineRed [ Sun Oct 04, 2020 5:01 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Please add me to the list as well. My slant 6 is in the machine shop for an overhaul and I would love to add this to the build. Many thanks! |
|
| Author: | bludev [ Mon Oct 05, 2020 9:03 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Put me down for one also if there is another run. Justin |
|
| Author: | curmudgeon [ Tue Oct 06, 2020 6:57 am ] |
| Post subject: | Re: Windage Trays - Interest |
Please add me as well. Fred |
|
| Author: | rosspulliam [ Thu Oct 08, 2020 12:31 pm ] |
| Post subject: | Re: Windage Trays - Interest |
| Me too! |
|
| Author: | earlyval [ Thu Oct 08, 2020 2:21 pm ] |
| Post subject: | Re: Windage Trays - Interest |
I'd purchase (3) if your run is large enough. Need (1). |
|
| Author: | Rick Covalt [ Thu Oct 08, 2020 5:18 pm ] |
| Post subject: | Re: Windage Trays - Interest |
You guys are killing me here!! When I decide I want to vibrate my arms off from grinding for 3 weeks solid, every spare moment I got, I'll let you know. 
|
|
| Author: | rosspulliam [ Thu Oct 08, 2020 8:10 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Quote: You guys are killing me here!! When I decide I want to vibrate my arms off from grinding for 3 weeks solid, ever spare moment I got, I'll let you know.
So, like, next week?
|
|
| Author: | slantzilla [ Thu Oct 08, 2020 11:16 pm ] |
| Post subject: | Re: Windage Trays - Interest |
I might have one in my closet. Not sure if I have a bolt kit or not. |
|
| Author: | Montana A Body [ Sun Oct 11, 2020 12:30 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Still hoping to purchase one if they become available. |
|
| Author: | MOUSETRAP [ Sun Oct 25, 2020 11:54 am ] |
| Post subject: | Re: Windage Trays - Interest |
Add me in for 1 and a crank scraper If you’re not able to make them. I What other company makes a slant six windage tray ?? Thanks |
|
| Author: | Rick Covalt [ Sun Oct 25, 2020 5:12 pm ] |
| Post subject: | Re: Windage Trays - Interest |
I still have a few scrapers if you want one. Send me a PM. Windage trays are a ways off .
|
|
| Author: | slantzilla [ Sun Oct 25, 2020 5:41 pm ] |
| Post subject: | Re: Windage Trays - Interest |
Thanks for the offer, but I have a complete tray, bolt kit, and scraper sitting in my den. I'm considering selling them. Thanks! D |
|
| Page 7 of 14 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|