| Slant Six Forum https://slantsix.org/forum/ |
|
| dumb valve question... https://slantsix.org/forum/viewtopic.php?t=10168 |
Page 1 of 1 |
| Author: | XIII [ Thu Aug 19, 2004 4:47 pm ] |
| Post subject: | dumb valve question... |
I'm about to order up some stainless valves for my 225, and I just started wondering...is 1.70/1.44 the stock valve sizes? I've read it some where befor but can't find it. I havn't miked my stock valves or anything...I just wanna make sure I'm not ordering an inlarged valve for my head. Thanks guys. |
|
| Author: | moparfreak [ Thu Aug 19, 2004 6:24 pm ] |
| Post subject: | |
nope the stock valve sizes are 1.62" and 1.36" |
|
| Author: | MrMopar [ Thu Aug 19, 2004 7:10 pm ] |
| Post subject: | |
I seem to rember back there were larger drop in valves? I seem to rember them being from a Ford of some sort. Am I right? |
|
| Author: | sixty4dartgt [ Thu Aug 19, 2004 7:15 pm ] |
| Post subject: | |
If you want over sized , some people use Ford valves. |
|
| Author: | panic [ Thu Aug 19, 2004 9:13 pm ] |
| Post subject: | |
Yes, they "drop right in", just as soon as the machinist is done with them. |
|
| Author: | MrMopar [ Fri Aug 20, 2004 6:09 am ] |
| Post subject: | |
What has to be done to them to fit? Thanks, Kyle. |
|
| Author: | Doctor Dodge [ Fri Aug 20, 2004 8:36 am ] |
| Post subject: | |
There are oversize "drop-in" valves for the SL6 from SRC and Egge machine. (search the messages) These are 1.70 and 1.44, in fact, I think it was SRC who was making them for Mopar way back when these were listed in the Performance cataloge. DD |
|
| Author: | argentina-slantsixer [ Sat Aug 21, 2004 7:36 am ] |
| Post subject: | |
si valvles makes drop in oversized valvles http://www.sivalves.com/ocdomestic_valvesps_dodge.html good luck! |
|
| Author: | XIII [ Mon Aug 23, 2004 6:50 pm ] |
| Post subject: | |
SI is who I was gonna order the valves from. I'm glad I posted asking about the sized befor I ordered! Does anyone know if they carry (or anyone else that does) a stock size stainless valve? My 225 is out of a 68 Coronet if that matters any.... |
|
| Author: | DusterIdiot [ Mon Aug 23, 2004 7:35 pm ] |
| Post subject: | Same page... |
The same page that lists the 1.70/1.44's also list the 'stock' size valves of the same type. I e-mailed them a while back and the 1.70/1.44's they said use the same retaining locks as the stock valves and have the same stem size as the OEM valves.... -D.Idiot |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|