| Slant Six Forum https://slantsix.org/forum/ |
|
| will a 3 spd bell housing work with a 4 speed? https://slantsix.org/forum/viewtopic.php?t=10319 |
Page 1 of 1 |
| Author: | Guest [ Sun Sep 05, 2004 7:44 am ] |
| Post subject: | will a 3 spd bell housing work with a 4 speed? |
Can I bolt a 4 speed transmission to a 3 speed belhousing? |
|
| Author: | Guest [ Sun Sep 05, 2004 8:55 pm ] |
| Post subject: | |
yes i did it 30yrs ago in a 64 cuda you have to weld the bellhousing to and a plate for the bolt patern |
|
| Author: | Guest [ Sun Sep 05, 2004 8:57 pm ] |
| Post subject: | |
yes i did it 30yrs ago in a 64 cuda you have to weld the bellhousing to add a plate for the bolt patern change from 3-4 speed |
|
| Author: | DusterIdiot [ Sun Sep 05, 2004 11:13 pm ] |
| Post subject: | Only with an adapter.... |
Only with an adapter or having the 3 speed housing re-machined. On many 70's mopars some 3 speed cars came with the 4 speed bellhousing as it is machined with both 3 and 4 speed patterns.... In a quick bolt up, you might not, but check to make sure you don't have an extra set of threaded bolt holes in your bellhousing.... -D.Idiot |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|