Engine upgrade

Unanswered topics | Active topics

Home » Board index » Other » Slixer's Gallery

All times are UTC-08:00

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

70valiant

Post subject: Engine upgrade

PostPosted: Tue Jul 19, 2005 4:53 pm

Offline

Turbo EFI

Joined: Mon Jul 14, 2003 10:02 am
Posts: 1817
Location: Southeastern Pennsylvania
Car Model:

I picked up a Clifford 4-barrel intake at Carlisle. I had to get an adapter and drill holes to make it fit but here it is. I am now running with a ported and milled head, 0.030 overbore, clifford headers and intake, 465 cfm holley, electric fan, 2.5" exhaust to the muffler and 2.25" tailpipe, 8 3/4" rear with 3.23's and a suregrip, and a recurved distributer(electronic conversion w/ a GM HEI module).
I need to spend some time tuning the carb, replace a header gasket(it sounds terrible right now) and lengthen the kickdown an inch or so.

_________________

Top

Profile

Reply with quote

Dennis Weaver

Post subject:

PostPosted: Tue Jul 19, 2005 11:45 pm

Offline

Board Sponsor

Joined: Tue Jul 08, 2003 11:33 am
Posts: 2378
Location: Central GA
Car Model: Many & varied, including stock & hopped up /6's

Good luck with that "carb"!

D/W

_________________

If it ain't broke, fix it!