E-mail me, I may be able to fix you up.
slantzilla@excite.com
| Slant Six Forum https://slantsix.org/forum/ |
|
| Triple weber intake https://slantsix.org/forum/viewtopic.php?t=11252 |
Page 1 of 2 |
| Author: | Al Shull [ Tue Dec 21, 2004 9:07 am ] |
| Post subject: | Triple weber intake |
Where can you buy a intake for the webers?(3/ 45 doce's) I tried Clifford and got a responce I wasn't sure if they still had them or not. Tried to sell a fuel injection set up to me instead of telling me a price and if they still had them. If I wanted to run fuel injection I be racing a new Hemi. Any leads would be of great help. thanks Al |
|
| Author: | slantzilla [ Tue Dec 21, 2004 8:05 pm ] |
| Post subject: | |
E-mail me, I may be able to fix you up. slantzilla@excite.com |
|
| Author: | hyper_pak [ Wed Dec 29, 2004 8:19 pm ] |
| Post subject: | I bought Mine from Steve Lukehurst from Down Under |
About 10- 15 years ago I bought 1 from Steve Lukehurst in australia. It cost about $90 US then and the only problem was the currency exchange. Google for down under suppliers and you should be able to find one. Funny thing, I sold mine to a street racer from NY NY, Tony and I never heard how he did with it. |
|
| Author: | Al Shull [ Thu Dec 30, 2004 6:08 pm ] |
| Post subject: | |
I did find a few places that have intakes/&complete set ups .Pierce Webers they have a web site under that name,Pentastar Racing Aussie site and Redline Webers. Slantzilla hooked me up with a good deal so I'm underway on my car. Hope this info helps someone else out. Thanks |
|
| Author: | argentina-slantsixer [ Sun Jan 30, 2005 11:23 am ] |
| Post subject: | |
I saw them at www.carbs.net they have them in stock (complete setup plus linkages, air filter, etc) |
|
| Author: | slantsixduster [ Sun Jan 30, 2005 6:46 pm ] |
| Post subject: | |
i found a SLANT 6 TRIPLE CARB CONVERSION The intake has three carbs, manifold and linkage. Triple 47mm side-draft carbs at http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=33550 |
|
| Author: | Charrlie_S [ Sun Jan 30, 2005 8:56 pm ] |
| Post subject: | |
He had that same setup listed a couple of weeks ago. Did not meet reserve. I e-mailed him, about what kind of carbs, and what brand of manifold, but did not get a reply. |
|
| Author: | buickroadster [ Sun Feb 06, 2005 10:05 pm ] |
| Post subject: | |
penentstar parts in oz,found on the mopar market site(www.moparmarket.com.au)has the manifolds and complete setups.good exchange rate(for you yanks!)should see the price quite competative.by the way,that steve L fella is still around,but he now drives a blown inline hemi(277 cu in oz mopar six)six powered '23 buick roadster hot rod! |
|
| Author: | 72Duster [ Tue Feb 22, 2005 5:45 am ] |
| Post subject: | |
I bought a couple of parts from www.pentastarparts.com.au a while pack. I payed 777US$ but never received anything! email support was poor. Guy gave me a tracking number that didnt exist. I think they didn´t ever send the parts to me. what can I do? nothing. |
|
| Author: | buickroadster [ Tue Feb 22, 2005 9:27 pm ] |
| Post subject: | |
boy,will i be carefull dealing with them now! if you want any parts, drop me a line, and i will get them off to you(i'm honest!) |
|
| Author: | VDART [ Wed Feb 23, 2005 4:32 am ] |
| Post subject: | Shipping from down under |
Just fyi, if you are dealing with the Aussie's pay the extra freight for quicker service-- US mail. i shipped a dash to there it took 5 months, but did make it, postal service is the most economical way to go but do not get in a hurry if you don't pay the extra. |
|
| Author: | VG-265 [ Fri Feb 25, 2005 3:28 am ] |
| Post subject: | |
I sent a package via post to from Australia to California and it took 8 months to arrive. Luckily the bloke in the USA was very understanding. |
|
| Author: | Red [ Sun Feb 27, 2005 8:04 pm ] |
| Post subject: | buying Ozzie parts |
A sidebar suggestion for those who seek a solution to currency exchange with Oz. I bought some Ozzie slant parts a couple years ago. The first time I used Western Union: a TOTAL nightmare. I will never do THAT again. Flakey, buggy website and ignorant phone operators with VERY marginal Engish language skills (obvious offshore outsourcing). Though everything worked out in the end, it was VERY time consuming and they charged a hefty currency conversion fee. Subsequent payments were made through the Ozzie outfit (somewhat similar to PayPal) which is called PayMate. That worked great. A FAR more satisfactory experience. http://www.paymate.com.au/ --Red |
|
| Author: | Chuck [ Sun Feb 27, 2005 8:34 pm ] |
| Post subject: | |
Quote: i found a SLANT 6 TRIPLE CARB CONVERSION
Dude, you gotta reduce or remove that massive mondo picture!
The intake has three carbs, manifold and linkage. Triple 47mm side-draft carbs at http://cgi.ebay.com/ebaymotors/ws/eBayI ... gory=33550 |
|
| Author: | Rayman440 [ Tue Jun 07, 2005 4:14 pm ] |
| Post subject: | Intakes from Oz |
Quote: I bought a couple of parts from www.pentastarparts.com.au a while pack. I payed 777US$ but never received anything! email support was poor. Guy gave me a tracking number that didnt exist. I think they didn´t ever send the parts to me. what can I do? nothing.
Hiya folks, don't get on here that often but was taken aback by this thread. As the proprietor of "Pentastar Parts & Restorations", I feel a short repy to this quote must be added. These items were indeed sent as requested, the tracking number provided was correct but it seems can only be tracked within Oz. I don't know why, but as advised at first point of purchase Australia Post could not provide any insurance for these items... has anyone else had any experience with sending items to Germany ?In closing, this is an unfortuante incident and we send a copious amount of goods offshore to Chrysler enthusiasts with no such trouble. Duster72, please contact me @ sales@pentastarparts.com.au so we can discuss this matter further. kind regards, Ray |
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|