| Slant Six Forum https://slantsix.org/forum/ |
|
| Roller Rockers for Slant Six https://slantsix.org/forum/viewtopic.php?t=11268 |
Page 1 of 2 |
| Author: | ^ChYmAiL^GTX [ Thu Dec 23, 2004 7:52 pm ] |
| Post subject: | Roller Rockers for Slant Six |
I am currently building my desing of roller rockers for Slant Six's. I'm building a set for my car, but i wanted to know if someone wants a set too. That could make the price a little lower, plus better quality. The rockers use slant standart lubricacion, and i assure complete lubricacion, also has 1,7 to 1 relation and can handle pretty hot springs. For mechanical cams only. I think the price would be around 350 U$S. But i'll have to confirm that later. Plus Shipment. I live in Argentina. That's one of the reasons why i started to desing this, you can't get them here. Here you can see a picture of the roller rockers: http://img147.exs.cx/my.php?loc=img147ℑ ... seo002.jpg I would like to know if anyone is intrested in buying them. Not that im asking you to buy it now... After built they will have severe test's done. But I would really like to know if anybody is interested. In Argentina Slant Six were the engines Dodge used in circuit racing like you've got Nascar, and they were invencible! When Dodge left Argentina in 1980's, other engines recived more modernization and slant six were left behind. I am building this with the help of Mechanical Engineers and one of the engine masters of that circuit racing, called Turismo Carretera here. I am a Mechanical Engineer student also. I am also designing intake manifolds for 4bbl carburators, headers, roller pushrods and roller camshafts. Hyperpaks cannot be used if you have double circuit brakes like i have. If you are interested just post a reply or send me and email to: chymailgtx@yahoo.com.ar All questions will be answerd. By the way, i have a Dodge GTX 1971 (Argentinian) with a 225 Slant Six. 4 speed gearbox. Good luck to all, have a Mery Christmas and a Happy New Year! PD: Pardon my english, we speak spanish here. ------------------ ^ChYmAiL^GTX Men are not judged by the way the fall, but by the way they stand up. |
|
| Author: | ^ChYmAiL^GTX [ Thu Dec 23, 2004 7:59 pm ] |
| Post subject: | |
Sorry.. here's the preview http://img147.exs.cx/img147/2346/Balanc ... seo002.jpg |
|
| Author: | Doctor Dodge [ Thu Dec 23, 2004 10:02 pm ] |
| Post subject: | |
Wow, true needle / roller bearings at the shaft, that is nice. Make sure you have enough spring clearance under the arm, the two support ribs shown in your design may hit the spring retainers. The big challenge is to find a way to get oil to the end of the roller tip, that is the high point on a Slant Six. DD http://www.dutra.org/pictures/engine/pa ... ockers.jpg |
|
| Author: | Dart270 [ Sun Jan 09, 2005 7:16 pm ] |
| Post subject: | |
For that price, and with good oiling, I would be interested in a set (or maybe two). Keep up the good work, Lou |
|
| Author: | SnoDawg [ Fri Jan 14, 2005 5:22 pm ] |
| Post subject: | |
I would be interested in a set. expecially at that price. Dawg |
|
| Author: | Rust collector [ Tue Feb 22, 2005 10:45 am ] |
| Post subject: | |
Have you got to the testing now? are they looking good? |
|
| Author: | olscoolVC [ Sun Jun 26, 2005 1:03 pm ] |
| Post subject: | |
Hi just wondering what stage you are up to and wether you were testing the roller rockers yet. I woul,d be keen for a set and would be able to sell a couple down here in australia too. cheers!! |
|
| Author: | blownhemi [ Tue Jul 05, 2005 3:36 am ] |
| Post subject: | |
Yep, you could definitely sell a few sets here in Australia. Keep us updated. |
|
| Author: | argentina-slantsixer [ Tue Jul 05, 2005 5:22 am ] |
| Post subject: | |
Hi there guys. Since Chy is my friend, I'll tell him you're kinda excited about his product. I've seen the early developement stage prototype and it's excellent. I'll tell him to keep us updated. |
|
| Author: | burninsix [ Tue Jul 05, 2005 2:03 pm ] |
| Post subject: | |
Please do, I might be interested in a set as well. |
|
| Author: | Dart270 [ Thu Jul 07, 2005 7:32 am ] |
| Post subject: | |
I am interested too. Lou |
|
| Author: | argentina-slantsixer [ Thu Jul 07, 2005 2:27 pm ] |
| Post subject: | |
I'm meeting with chy this week or next. |
|
| Author: | dartboard [ Mon Aug 01, 2005 2:22 pm ] |
| Post subject: | roller rockers |
Hello, I would certainly be interested in a set of roller rockers for my slant six to. Dartboard |
|
| Author: | 74SCAMP [ Mon Aug 01, 2005 2:41 pm ] |
| Post subject: | roller rockers |
i was wondering if these would be worth the money putting them on a mildly modified daily driver with mild cam, Super six intake, Dutra Duals, free flow exhaust, and shaved head? thanks! |
|
| Author: | Matt Cramer [ Tue Aug 02, 2005 5:29 am ] |
| Post subject: | |
I'd be very tempted to order a set, too. |
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
