The square end fits into the drive in the trans. The crimp-on square connector goes on to the cut-to-length round end of the cable, and drives the speedo.
-S/6
| Slant Six Forum https://slantsix.org/forum/ |
|
| replacing the speedo cable https://slantsix.org/forum/viewtopic.php?t=11349 |
Page 1 of 1 |
| Author: | Bing [ Tue Jan 04, 2005 3:36 pm ] |
| Post subject: | replacing the speedo cable |
I bought a universal speedo cable to replace mine. The instructions do not say which end of the cable, round or square, to insert into the crimp connector which goes into the speedometer. Who knows? |
|
| Author: | Super6 [ Tue Jan 04, 2005 3:43 pm ] |
| Post subject: | |
The square end fits into the drive in the trans. The crimp-on square connector goes on to the cut-to-length round end of the cable, and drives the speedo. -S/6 |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|