Hi, I just inherited a 1964 dodge Dart from my grandfather, and Iam in the process of fixing it up. I dont know to much about the slant six or dodge for that matter, so i was wonderin if anyone had any tips on how I could pump up the motor in anyway?? Please let me know if you have any suggestions or can point me in the right direction where i can find some help.
Thanks

Welcome to the site. You might try searching through the "Slixers" or "Virtual Dragstrip" sections to see about peoples' car modifications, then ask questions from there.

Think about how much you can spend, performance you want, driveability...

Lou

_________________
Home of Slant6-powered fun machines since 1988

Awesome!

There's some great info (reprinted from Mopar and other books) on the topic at:

http://listboy.freewebsitehosting.com/slant_6_data.htm

ALSO - before you spend too much money on the motor - it's usually a good idea to make sure that you have good tires, good brakes, etc..

_________________
1963 Dodge Dart, motor by Doug Dutra, Offenhauser two carb intake, Pertronix, Clifford 6x2, Flowmaster 40's, Erson RV15/295 RDP, head work. Addco anti-sway bar, urethane suspension bushings, KYB's, racing leafs, SSBC discs. Need ZDDP? Get STP.

The best "bang for the buck" mod.... anti-sway bars.
DD