You need to use the clifford, and send the offy to me...
| Slant Six Forum https://slantsix.org/forum/ |
|
| Clifford intake, or Offy intake? https://slantsix.org/forum/viewtopic.php?t=11979 |
Page 1 of 1 |
| Author: | Wesola78 [ Sun Feb 27, 2005 10:03 pm ] |
| Post subject: | Clifford intake, or Offy intake? |
I have one of each. Does the Offy intake have a lot more lowend than the Clifford intake on a stock slant? I would be using a 2bbl carb, nothing outrageous here. I've had this Clifford intake for a few years now, and I have an exhaust manifold with the carb heat deal cut down, and welded over. I might try it anyway just to see. |
|
| Author: | Dart270 [ Mon Feb 28, 2005 12:29 pm ] |
| Post subject: | |
It's not a big difference, but the Offy will have a little more down low, which is where a stock Slant works well. Lou |
|
| Author: | Rust collector [ Mon Feb 28, 2005 12:37 pm ] |
| Post subject: | |
You need to use the clifford, and send the offy to me...
|
|
| Author: | Wesola78 [ Tue Mar 01, 2005 6:04 am ] |
| Post subject: | |
Okay, I'll probably just use the Offy. I might try the Clifford though, since I have it. Thanks for the responses! 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|