no dice on either image...
| Slant Six Forum https://slantsix.org/forum/ |
|
| Time for a brake swap? https://slantsix.org/forum/viewtopic.php?t=12229 |
Page 1 of 1 |
| Author: | slantvaliant [ Mon Mar 14, 2005 3:34 pm ] |
| Post subject: | Time for a brake swap? |
| Author: | steponmebbbboom [ Mon Mar 14, 2005 5:42 pm ] |
| Post subject: | |
no dice on either image...
|
|
| Author: | slantvaliant [ Mon Mar 14, 2005 8:10 pm ] |
| Post subject: | |
I tried editing them. Did that work for you? I can see them on my machine. |
|
| Author: | moparDuster [ Mon Mar 14, 2005 8:57 pm ] |
| Post subject: | |
no dice this time looks like you rolled a 7. no image |
|
| Author: | Pierre [ Mon Mar 14, 2005 9:04 pm ] |
| Post subject: | |
Looks like you are trying to host them on a yahoo service. Are you sure this service allows public viewing of the images? Some only allow the person logged in to view the hosted content. |
|
| Author: | slantvaliant [ Tue Mar 15, 2005 6:31 am ] |
| Post subject: | |
Could be. I'll look for another host site for the pics. |
|
| Author: | slantvaliant [ Tue Mar 15, 2005 7:07 am ] |
| Post subject: | |
Anyway, there is heavy circumferential scoring and some evidence of galling on the spindle extending about 3/4" from the end of the threads. Inside the drum where the outer race of the inner bearing sits, it is heavily worn and scored, both circumferentially and axially. Neither is useable. |
|
| Author: | steponmebbbboom [ Tue Mar 15, 2005 7:22 pm ] |
| Post subject: | |
Yeah, anyway. I say go for it, if you have all the parts you need or close to it. |
|
| Author: | slantvaliant [ Wed Mar 23, 2005 3:21 pm ] |
| Post subject: | |
Let's try this again: Spindle  Drum Hub 
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|